Wire Cup Brushes
510761 WIRE CUP BRUSH STANDARD, 75MMX5/8"
IMPA:510761
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510762 WIRE CUP BRUSH STANDARD, 100MMX5/8"
IMPA:510762
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510763 WIRE CUP BRUSH STANDARD, 150MMX7/8"
IMPA:510763
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510766 WIRE CUP BRUSH KNOT TYPE, 75MMX5/8"
IMPA:510766
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510767 WIRE CUP BRUSH KNOT TYPE, 100MMX5/8"
IMPA:510767
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510768 WIRE CUP BRUSH KNOT TYPE, 150MMX7/8"
IMPA:510768
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510771 BRUSH WIRE WHEEL STANDARD, 75MMX3/8"
IMPA:510771
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510772 BRUSH WIRE WHEEL STANDARD, 100MMX3/8"
IMPA:510772
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510773 BRUSH WIRE WHEEL STANDARD, 125MMX1/2"
IMPA:510773
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510774 BRUSH WIRE WHEEL STANDARD, 150MMX3/4"
IMPA:510774
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510775 BRUSH WIRE WHEEL STANDARD, 200MMX3/4"
IMPA:510775
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510776 BRUSH WIRE WHEEL STANDARD, 250MMX1"
IMPA:510776
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510777 BRUSH WIRE WHEEL STANDARD, 300MMX1"
IMPA:510777
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510785 BRUSH WIRE WHEEL THREADED NUT, TYPE 75MMXM10THREAD
IMPA:510785
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510786 BRUSH WIRE WHEEL OD50MM, WITH 6MM ARBOR
IMPA:510786
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
510787 BRUSH WIRE CUP OD50MM, WITH 6MM ARBOR
IMPA:510787
MTML UOM:PCE
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
© 2025 ShipServ Limited