Vapor Abrasive Blast Equipment

590816 BLAST MACHINE ECOQUIP 2 EQP W/, 1/2X15M HOSE/#4NOZZLE 278861

IMPA:590816

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A portable, powerful machine with 55 ltr water capacity, weight is only 99.8 kgs at empty. It can blast for up to 90 minutes between refills, works well with coarse, fine or non-destructive media. Low water usage, less mess - Only uses 1/2 to 1 qt./min. of water. Fast removal rates compared to other cleaning methods - Blast pressures up 150 psi (10 bar)

590817 BLAST MACHINE ECOQUIP 2 EQP W/, 1"X15M HOSE/#5NOZZLE 278862

IMPA:590817

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A portable, powerful machine with 55 ltr water capacity, weight is only 99.8 kgs at empty. It can blast for up to 90 minutes between refills, works well with coarse, fine or non-destructive media. Low water usage, less mess - Only uses 1/2 to 1 qt./min. of water. Fast removal rates compared to other cleaning methods - Blast pressures up 150 psi (10 bar)

590818 BLAST MACHINE GRACO ECOQUIP 2, EQM PNEUMATIC CONTROL #262952

IMPA:590818

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A compact, fully portable entry-level unit. The built-in hand truck with over-sized wheels makes the EQm easy to move around. Mobile units have a coated enclosure and water inlet regulator for the hose connection. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #7 standard nozzle and tool kit.

590819 BLAST MACHINE GRACO ECOQUIP 2, EQM ELECTRIC CONTROL #262953

IMPA:590819

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A compact, fully portable entry-level unit. The built-in hand truck with over-sized wheels makes the EQm easy to move around. Mobile units have a coated enclosure and water inlet regulator for the hose connection. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #7 standard nozzle and tool kit.

590820 BLAST MACHINE GRACO ECOQUIP 2, EQM PNEUMATIC ATEX #262954

IMPA:590820

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A compact, fully portable entry-level unit. The built-in hand truck with over-sized wheels makes the EQm easy to move around. Mobile units have a coated enclosure and water inlet regulator for the hose connection. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #7 standard nozzle and tool kit.

590826 BLAST MACHINE GRACO ECOQUIP 2, EQS PNEUMATIC CONTROL #262962

IMPA:590826

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A high production, entry-level skid unit. Designed to tackle most typical blasting applications. The EQs is built according to extremely strict standards and can be stacked safely on a platform or a ship deck. Standard models have a coated crash frame and enclosure. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #8 HP nozzle and tool kit.

590827 BLAST MACHINE GRACO ECOQUIP 2, EQS ELECTRIC CONTROL #262963

IMPA:590827

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A high production, entry-level skid unit. Designed to tackle most typical blasting applications. The EQs is built according to extremely strict standards and can be stacked safely on a platform or a ship deck. Standard models have a coated crash frame and enclosure. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #8 HP nozzle and tool kit.

590828 BLAST MACHINE GRACO ECOQUIP 2, EQS PNEUMATIC ATEX #262964

IMPA:590828

MTML UOM:SET

Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI). Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application 1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A high production, entry-level skid unit. Designed to tackle most typical blasting applications. The EQs is built according to extremely strict standards and can be stacked safely on a platform or a ship deck. Standard models have a coated crash frame and enclosure. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #8 HP nozzle and tool kit.

590829 HOSE BLAST FOR REPLACEMENT, ELECTRIC 1"IDX15MTR #26A074

IMPA:590829

MTML UOM:LN

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590830 HOSE BLAST FOR REPLACEMENT, PNEUMATIC 1/2"IDX15MTR #24Z140

IMPA:590830

MTML UOM:LN

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590836 HOSE BLAST FOR REPLACEMENT, PNEUMATIC 1"IDX15MTR #26A075

IMPA:590836

MTML UOM:LN

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590837 HOSE BLAST FOR EXTENSION, ELECTRIC 1"IDX15MTR #26A076

IMPA:590837

MTML UOM:LN

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590838 HOSE BLAST FOR EXTENSION, PNEUMATIC 1/2"IDX15MTR #24Z141

IMPA:590838

MTML UOM:LN

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590839 HOSE BLAST FOR EXTENSION, PNEUMATIC 1"IDX15MTR #26A077

IMPA:590839

MTML UOM:LN

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590840 SWITCH BLAST CONTROL PNEUMATIC, FOR BLASTING MACHINE #17D788

IMPA:590840

MTML UOM:PCE

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.

590841 SWITCH BLAST CONTROL ELECTRIC, FOR BLASTING MACHINE #17L331

IMPA:590841

MTML UOM:PCE

Blast Hose Designed for flexibility and ergonomics, the Graco blast hose can reduce fatigue and improve job efficiency while withstanding rugged blasting environments.