Flexible Shafts and Spare Parts for ICOFLEX Chipping Hammer

591921 FLEXIBLE SHAFT 2220-ZN ICOFEX, CHIPPING HAMMER W/STEEL SHEATH

IMPA:591921

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591922 FLEXIBLE SHAFT 2220-SG ICOFEX, CHIPPING HAMMER RUBBER SHEATH

IMPA:591922

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591923 HANDLE SPINDLE FOR FLEX SHAFT, ICO 2220-3

IMPA:591923

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591924 HANDLE FOR FLEXIBLE SHAFT, ICO 2220MN

IMPA:591924

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591931 6 HAMMER HEAD #2000-5M FOR, ICO CHIPPING HAMMER

IMPA:591931

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591932 9 HAMMER HEAD #2000-2M FOR, ICO CHIPPING HAMMER

IMPA:591932

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591933 12 HAMMER HEAD #2000-1M FOR, ICO CHIPPING HAMMER

IMPA:591933

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591934 3 CUTTER HEAD #2000-5F FOR, ICO CHIPPING HAMMER

IMPA:591934

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591935 6 CUTTER HEAD #2000-4F FOR, ICO CHIPPING HAMMER

IMPA:591935

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591936 STEEL HAMMER #2000-19 FOR, ICO CHIPPING HAMMER

IMPA:591936

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591937 3 HOLE FLANGE #2000-23 FOR, ICO CHIPPING HAMMER

IMPA:591937

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591938 6 HOLE FLANGE #2000-28F FOR, ICO CHIPPING HAMMER

IMPA:591938

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591939 STEEL CUTTER #2000-24 FOR, ICO CHIPPING HAMMER

IMPA:591939

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591940 PIVOT FOR HAMMER #2000-26 FOR, ICO CHIPPING HAMMER

IMPA:591940

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591941 PIVOT FOR CUTTER #2000-22 FOR, ICO CHIPPING HAMMER

IMPA:591941

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591942 SPINDLE FOR WIRE/CUP BRUSH, #2000-29-C/T F/ICO CHIP HAMMER

IMPA:591942

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591943 SPINDLE FOR 3 CUTTER HEAD, #2000-21 F/ICO CHIPPING HAMMER

IMPA:591943

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591944 SPINDLE FOR 9 HAMMER HEAD, #2000-25 F/ICO CHIPPING HAMMER

IMPA:591944

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591945 W SPINDLE CENTER PIN F/12 HAMMER, #2000-27 F/ICO CHIPPING HAMMER

IMPA:591945

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591946 W WIRE BRUSH TWISTED WIRE, #2000-6/2R F/ICO CHIP HAMMER

IMPA:591946

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591947 W WIRE BRUSH SINGLE WIRE, #2000-6/2S F/ICO CHIP HAMMER

IMPA:591947

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591948 WIRE CUP BRUSH TWISTED WIRE, #2000-7R F/ICO CHIPPING HAMMER

IMPA:591948

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591949 WIRE CUP BRUSH SINGLE WIRE, #2000-7S F/ICO CHIPPING HAMMER

IMPA:591949

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591950 WIRE WHEEL BRUSH TWISTED WIRE, #2000-6R F/ICO CHIPPING HAMMER

IMPA:591950

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591951 WIRE WHEEL BRUSH SINGLE WIRE, #2000-6S F/ICO CHIPPING HAMMER

IMPA:591951

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591952 EMERY WHEEL #200-9, FOR ICO CHIPPING HAMMER

IMPA:591952

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591953 CHUCK #2000-8 FOR ICO CHIPPING, HAMMER

IMPA:591953

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591954 SAFETY GUARD #2000-11, FOR ICO CHIPPING HAMMER

IMPA:591954

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.

591955 CIRCULAR SAW #2000-10, FOR ICO CHIPPING HAMMER

IMPA:591955

MTML UOM:PCE

Flexible shaft made of either galvanized steel or rubber coated sheath, standard length 2.5 mtr – tool connection 5/8” W – special lengths and connections on request.