Sump Pumps Pneumatic
591631 PUMP SUMP PNEUMATIC ICO, NODULAR CAST IRON HEAD 25MTR
IMPA:591631
MTML UOM:SET
This pump is used both in the naval and in the civil sector, and on the ships for removal of salt water mixed with petrol. Highly resistant centrifugal pump, built in nodular cast iron or bronze (sparkless version) and has a remarkable shock resistance. The engine is sealed to avoid water leakage or penetration of sand or other particles. The impeller is in bronze and the transmission shafts are sleeved in bushings and special bearings. Equipped with lifting handle and suction filter. Accessories: Connections and pipes for air and water – Air filters and nebulizer – Mufflers conforming to EEC Regulations.
591632 PUMP SUMP PNEUMATIC ICO, BRONZE HEAD 40MTR #900-BZ C
IMPA:591632
MTML UOM:SET
This pump is used both in the naval and in the civil sector, and on the ships for removal of salt water mixed with petrol. Highly resistant centrifugal pump, built in nodular cast iron or bronze (sparkless version) and has a remarkable shock resistance. The engine is sealed to avoid water leakage or penetration of sand or other particles. The impeller is in bronze and the transmission shafts are sleeved in bushings and special bearings. Equipped with lifting handle and suction filter. Accessories: Connections and pipes for air and water – Air filters and nebulizer – Mufflers conforming to EEC Regulations.
591635 SUMP PUMP PNEUMATIC LIFT 15MTR
IMPA:591635
MTML UOM:SET
Suitable to empty ballast tanks, bilge wells, etc. in emergency cases. Often used for draining cargo holds during and after the washing procedure. Especially preferred where an electric spark may risk ignition or explosion. Required air pressure is 0.59 MPa (6 kgf/cm2).
591636 SUMP PUMP PNEUMATIC LIFT 20MTR
IMPA:591636
MTML UOM:SET
Suitable to empty ballast tanks, bilge wells, etc. in emergency cases. Often used for draining cargo holds during and after the washing procedure. Especially preferred where an electric spark may risk ignition or explosion. Required air pressure is 0.59 MPa (6 kgf/cm2).
591637 SUMP PUMP PNEUMATIC LIFT 25MTR
IMPA:591637
MTML UOM:SET
Suitable to empty ballast tanks, bilge wells, etc. in emergency cases. Often used for draining cargo holds during and after the washing procedure. Especially preferred where an electric spark may risk ignition or explosion. Required air pressure is 0.59 MPa (6 kgf/cm2).
591638 PUMP SUBMERSIBLE WARREN RUPP, SMA3-A MAX FLOW 300 GAL/MIN
IMPA:591638
MTML UOM:SET
Air-powered trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1.5" (3.8cm). High capacity - low head. It weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available
© 2025 ShipServ Limited