Hydraulic Jacks
615136 JACK HYDRAULIC 35MM-STROKE, 10TON SPRING RETURN TYPE
IMPA:615136
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615137 JACK HYDRAULIC 150MM-STROKE, 10TON SPRING RETURN TYPE
IMPA:615137
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615138 JACK HYDRAULIC 50MM-STROKE, 20TON SPRING RETURN TYPE
IMPA:615138
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615139 JACK HYDRAULIC 125MM-STROKE, 20TON SPRING RETURN TYPE
IMPA:615139
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615140 JACK HYDRAULIC 125MM-STROKE, 30TON SPRING RETURN TYPE
IMPA:615140
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615141 JACK HYDRAULIC 25MM-STROKE, 50TON SPRING RETURN TYPE
IMPA:615141
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615142 JACK HYDRAULIC 50MM-STROKE, 50TON SPRING RETURN TYPE
IMPA:615142
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615143 JACK HYDRAULIC 150MM-STROKE, 50TON SPRING RETURN TYPE
IMPA:615143
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.
615146 JACK HYDRAULIC 150MM-STROKE, 10TON HYDRAULIC RETURN TYPE
IMPA:615146
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615147 JACK HYDRAULIC 55MM-STROKE, 20TON HYDRAULIC RETURN TYPE
IMPA:615147
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615148 JACK HYDRAULIC 150MM-STROKE, 20TON HYDRAULIC RETURN TYPE
IMPA:615148
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615149 JACK HYDRAULIC 300MM-STROKE, 20TON HYDRAULIC RETURN TYPE
IMPA:615149
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615150 JACK HYDRAULIC 150MM-STROKE, 50TON HYDRAULIC RETURN TYPE
IMPA:615150
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615151 JACK HYDRAULIC 300MM-STROKE, 50TON HYDRAULIC RETURN TYPE
IMPA:615151
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615152 JACK HYDRAULIC 150MM-STROKE, 100TON HYDRAULIC RETURN TYPE
IMPA:615152
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
615153 JACK HYDRAULIC 300MM-STROKE, 100TON HYDRAULIC RETURN TYPE
IMPA:615153
MTML UOM:PCE
Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.
About
Support
© 2026 ShipServ Limited