Socket Wrenches
Cross Bar Handles
Deep Socket Wrenches
Driver Sockets
Extension bars for socket wrenches
Extension Driver Handles
Nut Spinner Handles
Offset Handles
Power Wrenches
Ratchet Handles
Sliding T Handles
Socket Adapters
Socket Wrench Set
Socket Wrench Set 12.7mm
Socket Wrench Set 19.0mm
Socket Wrench Set 25.4mm
Socket Wrench Set 6.35mm
Socket Wrench Set 9.5mm
Socket Wrenches
Speed T Handles
Speeder Handles
Stud Remover Wrenches
Universal Joints
61. Hand ToolsSocket Wrenches Socket Wrenches

Socket Wrenches

610181 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX5MM
610181 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX5MM
IMPA:610181
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610182 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX5.5MM (7/32")
610182 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX5.5MM (7/32")
IMPA:610182
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610183 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX6MM
610183 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX6MM
IMPA:610183
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610184 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX7MM (9/32")
610184 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX7MM (9/32")
IMPA:610184
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610185 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX8MM (5/16")
610185 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX8MM (5/16")
IMPA:610185
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610186 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX9MM (11/32")
610186 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX9MM (11/32")
IMPA:610186
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610187 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX10MM
610187 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX10MM
IMPA:610187
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610188 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX11MM (7/16")
610188 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX11MM (7/16")
IMPA:610188
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610189 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX12MM (15/32")
610189 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX12MM (15/32")
IMPA:610189
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610190 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX13MM
610190 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX13MM
IMPA:610190
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610191 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX14MM
610191 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX14MM
IMPA:610191
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610192 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX3/16"
610192 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX3/16"
IMPA:610192
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610193 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX1/4"
610193 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX1/4"
IMPA:610193
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610194 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX9/32"
610194 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX9/32"
IMPA:610194
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610195 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX11/32"
610195 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX11/32"
IMPA:610195
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610196 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX3/8"
610196 SOCKET WRENCH 6-POINT, 6.35MM/SQ DRIVEX3/8"
IMPA:610196
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610201 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX6MM
610201 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX6MM
IMPA:610201
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610202 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX7MM (9/32")
610202 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX7MM (9/32")
IMPA:610202
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610203 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX8MM (5/16")
610203 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX8MM (5/16")
IMPA:610203
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610204 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX9MM (11/32")
610204 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX9MM (11/32")
IMPA:610204
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610205 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX10MM
610205 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX10MM
IMPA:610205
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610206 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX11MM (7/16")
610206 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX11MM (7/16")
IMPA:610206
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610207 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX12MM (15/32")
610207 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX12MM (15/32")
IMPA:610207
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610208 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX13MM
610208 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX13MM
IMPA:610208
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610209 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX14MM
610209 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX14MM
IMPA:610209
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610210 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX17MM (21/32")
610210 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX17MM (21/32")
IMPA:610210
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610211 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX19MM (3/4")
610211 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX19MM (3/4")
IMPA:610211
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610212 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX21MM (13/16")
610212 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX21MM (13/16")
IMPA:610212
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610213 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX22MM
610213 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX22MM
IMPA:610213
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610214 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX1/4"
610214 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX1/4"
IMPA:610214
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610215 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX9/32"
610215 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX9/32"
IMPA:610215
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610216 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX11/32"
610216 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX11/32"
IMPA:610216
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610217 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX3/8"
610217 SOCKET WRENCH 6-POINT, 9.5MM/SQ DRIVEX3/8"
IMPA:610217
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610221 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX10MM
610221 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX10MM
IMPA:610221
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610222 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX11MM (7/16")
610222 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX11MM (7/16")
IMPA:610222
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610223 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX12MM (15/32")
610223 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX12MM (15/32")
IMPA:610223
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610224 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX13MM
610224 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX13MM
IMPA:610224
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610225 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX14MM
610225 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX14MM
IMPA:610225
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610226 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX14.5MM
610226 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX14.5MM
IMPA:610226
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610227 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX15MM (19/32")
610227 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX15MM (19/32")
IMPA:610227
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610228 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX16MM (5/8")
610228 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX16MM (5/8")
IMPA:610228
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610229 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17MM (21/32")
610229 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17MM (21/32")
IMPA:610229
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610230 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17.5MM (11/16")
610230 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17.5MM (11/16")
IMPA:610230
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610231 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX19MM (3/4")
610231 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX19MM (3/4")
IMPA:610231
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610232 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX21MM (13/16")
610232 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX21MM (13/16")
IMPA:610232
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610233 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX22MM
610233 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX22MM
IMPA:610233
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610234 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX23MM
610234 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX23MM
IMPA:610234
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610235 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX1/2"
610235 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX1/2"
IMPA:610235
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610236 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17/32"
610236 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17/32"
IMPA:610236
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610237 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX13/16"
610237 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX13/16"
IMPA:610237
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610238 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX7/8"
610238 SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX7/8"
IMPA:610238
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610241 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX8MM (5/16")
610241 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX8MM (5/16")
IMPA:610241
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610242 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX9MM (11/32")
610242 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX9MM (11/32")
IMPA:610242
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610243 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX10MM
610243 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX10MM
IMPA:610243
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610244 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX11MM (7/16")
610244 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX11MM (7/16")
IMPA:610244
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610245 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX12MM (15/32")
610245 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX12MM (15/32")
IMPA:610245
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610246 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX13MM
610246 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX13MM
IMPA:610246
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610247 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX14MM
610247 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX14MM
IMPA:610247
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610248 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX15MM (19/32")
610248 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX15MM (19/32")
IMPA:610248
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610249 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX16MM (5/8")
610249 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX16MM (5/8")
IMPA:610249
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610250 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX17MM (21/32")
610250 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX17MM (21/32")
IMPA:610250
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610251 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX18MM
610251 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX18MM
IMPA:610251
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610252 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX19MM (3/4")
610252 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX19MM (3/4")
IMPA:610252
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610253 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX20MM (25/32")
610253 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX20MM (25/32")
IMPA:610253
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610254 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX21MM (13/16")
610254 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX21MM (13/16")
IMPA:610254
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610255 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX22MM
610255 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX22MM
IMPA:610255
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610256 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX23MM
610256 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX23MM
IMPA:610256
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610257 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX24MM
610257 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX24MM
IMPA:610257
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610258 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX26MM
610258 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX26MM
IMPA:610258
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610259 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX27MM( 1-1/16")
610259 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX27MM( 1-1/16")
IMPA:610259
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610260 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX28MM
610260 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX28MM
IMPA:610260
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610261 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX29MM (1-1/8")
610261 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX29MM (1-1/8")
IMPA:610261
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610262 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX30MM (1-3/16")
610262 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX30MM (1-3/16")
IMPA:610262
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610263 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX32MM (1-1/4")
610263 SOCKET WRENCH 6-POINT, 12.7MM/SQ DRIVEX32MM (1-1/4")
IMPA:610263
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610266 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX8MM (5/16")
610266 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX8MM (5/16")
IMPA:610266
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610267 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX9MM (11/32")
610267 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX9MM (11/32")
IMPA:610267
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610268 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX10MM
610268 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX10MM
IMPA:610268
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610269 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX11MM (7/16")
610269 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX11MM (7/16")
IMPA:610269
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610270 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX12MM (15/32")
610270 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX12MM (15/32")
IMPA:610270
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610271 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX13MM
610271 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX13MM
IMPA:610271
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610272 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX14MM
610272 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX14MM
IMPA:610272
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610273 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX14.5MM
610273 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX14.5MM
IMPA:610273
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610274 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX15MM (19/32")
610274 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX15MM (19/32")
IMPA:610274
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610275 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX16MM (5/8")
610275 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX16MM (5/8")
IMPA:610275
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610276 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX17MM (21/32")
610276 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX17MM (21/32")
IMPA:610276
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610277 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX17.5MM(11/16")
610277 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX17.5MM(11/16")
IMPA:610277
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610278 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX18MM
610278 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX18MM
IMPA:610278
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610279 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX19MM (3/4")
610279 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX19MM (3/4")
IMPA:610279
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610280 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX20MM (25/32")
610280 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX20MM (25/32")
IMPA:610280
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610281 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX21MM (13/16")
610281 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX21MM (13/16")
IMPA:610281
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610282 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX22MM
610282 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX22MM
IMPA:610282
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610283 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX23MM
610283 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX23MM
IMPA:610283
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610284 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX24MM (15/16")
610284 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX24MM (15/16")
IMPA:610284
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610285 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX26MM
610285 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX26MM
IMPA:610285
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610286 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX27MM (1-1/16")
610286 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX27MM (1-1/16")
IMPA:610286
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610287 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX28MM
610287 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX28MM
IMPA:610287
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610288 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX29MM (1-1/8")
610288 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX29MM (1-1/8")
IMPA:610288
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610289 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX30MM (1-3/16")
610289 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX30MM (1-3/16")
IMPA:610289
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610290 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX32MM (1-1/4")
610290 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX32MM (1-1/4")
IMPA:610290
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
610291 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX33MM
610291 SOCKET WRENCH 12-POINT, 12.7MM/SQ DRIVEX33MM
IMPA:610291
MTML UOM:PCE
These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the socket and the size of the opening. The following illustrations show how to measure the opening of the socket sizes properly. Careful When Ordering! American and Metric wrench sizes are taken across the flats of the bolt head, British Standard size is taken from the outside diameter of threads.
About
Support
Suppliers
Brands
Categories
Countries
TradeNet
Terms of Use
Privacy Policy
Cookie Policy

© 2026 ShipServ Limited