Drills Straight Shank Twist
630101 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.3MM
IMPA:630101
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630102 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.4MM
IMPA:630102
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630103 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.5MM
IMPA:630103
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630104 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.6MM
IMPA:630104
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630105 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.7MM
IMPA:630105
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630106 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.8MM
IMPA:630106
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630107 DRILL H.S.S. STRAIGHT SHANK, TWIST 0.9MM
IMPA:630107
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630108 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.0MM
IMPA:630108
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630109 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.1MM
IMPA:630109
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630110 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.2MM
IMPA:630110
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630111 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.3MM
IMPA:630111
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630112 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.4MM
IMPA:630112
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630113 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.5MM
IMPA:630113
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630114 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.6MM
IMPA:630114
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630115 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.7MM
IMPA:630115
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630116 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.8MM
IMPA:630116
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630117 DRILL H.S.S. STRAIGHT SHANK, TWIST 1.9MM
IMPA:630117
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630118 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.0MM
IMPA:630118
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630119 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.1MM
IMPA:630119
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630120 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.2MM
IMPA:630120
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630121 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.3MM
IMPA:630121
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630122 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.4MM
IMPA:630122
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630123 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.5MM
IMPA:630123
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630124 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.6MM
IMPA:630124
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630125 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.7MM
IMPA:630125
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630126 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.8MM
IMPA:630126
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630127 DRILL H.S.S. STRAIGHT SHANK, TWIST 2.9MM
IMPA:630127
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630128 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.0MM
IMPA:630128
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630129 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.1MM
IMPA:630129
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630130 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.2MM
IMPA:630130
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630131 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.3MM
IMPA:630131
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630132 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.4MM
IMPA:630132
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630133 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.5MM
IMPA:630133
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630134 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.6MM
IMPA:630134
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630135 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.7MM
IMPA:630135
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630136 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.8MM
IMPA:630136
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630137 DRILL H.S.S. STRAIGHT SHANK, TWIST 3.9MM
IMPA:630137
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630138 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.0MM
IMPA:630138
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630139 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.1MM
IMPA:630139
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630140 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.2MM
IMPA:630140
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630141 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.3MM
IMPA:630141
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630142 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.4MM
IMPA:630142
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630143 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.5MM
IMPA:630143
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630144 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.6MM
IMPA:630144
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630145 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.7MM
IMPA:630145
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630146 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.8MM
IMPA:630146
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630147 DRILL H.S.S. STRAIGHT SHANK, TWIST 4.9MM
IMPA:630147
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630148 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.0MM
IMPA:630148
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630149 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.1MM
IMPA:630149
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630150 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.2MM
IMPA:630150
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630151 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.3MM
IMPA:630151
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630152 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.4MM
IMPA:630152
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630153 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.5MM
IMPA:630153
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630154 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.6MM
IMPA:630154
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630155 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.7MM
IMPA:630155
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630156 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.8MM
IMPA:630156
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630157 DRILL H.S.S. STRAIGHT SHANK, TWIST 5.9MM
IMPA:630157
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630158 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.0MM
IMPA:630158
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630159 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.1MM
IMPA:630159
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630160 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.2MM
IMPA:630160
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630161 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.3MM
IMPA:630161
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630162 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.4MM
IMPA:630162
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630163 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.5MM
IMPA:630163
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630164 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.6MM
IMPA:630164
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630165 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.7MM
IMPA:630165
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630166 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.8MM
IMPA:630166
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630167 DRILL H.S.S. STRAIGHT SHANK, TWIST 6.9MM
IMPA:630167
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630168 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.0MM
IMPA:630168
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630169 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.1MM
IMPA:630169
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630170 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.2MM
IMPA:630170
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630171 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.3MM
IMPA:630171
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630172 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.4MM
IMPA:630172
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630173 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.5MM
IMPA:630173
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630174 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.6MM
IMPA:630174
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630175 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.7MM
IMPA:630175
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630176 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.8MM
IMPA:630176
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630177 DRILL H.S.S. STRAIGHT SHANK, TWIST 7.9MM
IMPA:630177
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630178 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.0MM
IMPA:630178
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630179 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.1MM
IMPA:630179
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630180 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.2MM
IMPA:630180
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630181 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.3MM
IMPA:630181
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630182 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.4MM
IMPA:630182
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630183 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.5MM
IMPA:630183
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630184 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.6MM
IMPA:630184
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630185 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.7MM
IMPA:630185
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630186 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.8MM
IMPA:630186
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630187 DRILL H.S.S. STRAIGHT SHANK, TWIST 8.9MM
IMPA:630187
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630188 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.0MM
IMPA:630188
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630189 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.1MM
IMPA:630189
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630190 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.2MM
IMPA:630190
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630191 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.3MM
IMPA:630191
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630192 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.4MM
IMPA:630192
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630193 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.5MM
IMPA:630193
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630194 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.6MM
IMPA:630194
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630195 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.7MM
IMPA:630195
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630196 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.8MM
IMPA:630196
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630197 DRILL H.S.S. STRAIGHT SHANK, TWIST 9.9MM
IMPA:630197
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630198 DRILL H.S.S. STRAIGHT SHANK, TWIST 10.0MM
IMPA:630198
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630199 DRILL H.S.S. STRAIGHT SHANK, TWIST 10.5MM
IMPA:630199
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
630201 DRILL H.S.S. STRAIGHT SHANK, TWIST 11.0MM
IMPA:630201
MTML UOM:PCE
The drills are of the correctional two-flute design with helix angles, flute and point shapes selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.
© 2025 ShipServ Limited