Tools Single Point
Cemented Carbide Tips
Inserts Cemented Carbide Throw-away
Square Tool Bits
Tool Bit Material
Tool Bits High Speed Steel Tip Welded - Bent Finishing Tool #15
Tool Bits High Speed Steel Tip Welded - Bent Tool #14
Tool Bits High Speed Steel Tip Welded - Bent Tool #63
Tool Bits High Speed Steel Tip Welded - Bore Finishing Tool #42
Tool Bits High Speed Steel Tip Welded - Boring Tool #41
Tool Bits High Speed Steel Tip Welded - External Threading Tool #51
Tool Bits High Speed Steel Tip Welded - Hand Knife Tool #62
Tool Bits High Speed Steel Tip Welded - Internal Threading Tool #52
Tool Bits High Speed Steel Tip Welded - Knife Tool #13
Tool Bits High Speed Steel Tip Welded - Parting Tool #31
Tool Bits High Speed Steel Tip Welded - Parting Tool #66
Tool Bits High Speed Steel Tip Welded - Pointed Nose #10
Tool Bits High Speed Steel Tip Welded - Pointed Nose Straight Tool #60
Tool Bits High Speed Steel Tip Welded - Round Nose Boring Tool #40
Tool Bits High Speed Steel Tip Welded - Spring Finishing Tool #22
Tool Bits High Speed Steel Tip Welded - Spring Finishing Tool #65
Tool Bits High Speed Steel Tip Welded - Spring Parting Tool #32
Tool Bits High Speed Steel Tip Welded - Spring Threading Tool #53
Tool Bits High Speed Steel Tip Welded - Square Nose #64
Tool Bits Plate Cutting-off
Tool Bits Rectangular Flat
Tool Bits Rectangular Plate
Tool Bits Round Bar
Tools Single Point
63. Cutting ToolsTool Bits / Carbide TipsTools Single Point

Tools Single Point

632701 TOOL WITH CARBIDE TIP SINGLE, #31-1 RIGHT HAND 13X13X100MM
632701 TOOL WITH CARBIDE TIP SINGLE, #31-1 RIGHT HAND 13X13X100MM
IMPA:632701
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
632702 TOOL WITH CARBIDE TIP SINGLE, #31-2 RIGHT HAND 16X16X120MM
632702 TOOL WITH CARBIDE TIP SINGLE, #31-2 RIGHT HAND 16X16X120MM
IMPA:632702
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
632703 TOOL WITH CARBIDE TIP SINGLE, #31-3 RIGHT HAND 19X19X140MM
632703 TOOL WITH CARBIDE TIP SINGLE, #31-3 RIGHT HAND 19X19X140MM
IMPA:632703
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
632704 TOOL WITH CARBIDE TIP SINGLE, #31-4 RIGHT HAND 25X25X160MM
632704 TOOL WITH CARBIDE TIP SINGLE, #31-4 RIGHT HAND 25X25X160MM
IMPA:632704
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
632705 TOOL WITH CARBIDE TIP SINGLE, #31-5 RIGHT HAND 25X30X180MM
632705 TOOL WITH CARBIDE TIP SINGLE, #31-5 RIGHT HAND 25X30X180MM
IMPA:632705
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
632706 TOOL WITH CARBIDE TIP SINGLE, #31-6 RIGHT HAND 30X35X200MM
632706 TOOL WITH CARBIDE TIP SINGLE, #31-6 RIGHT HAND 30X35X200MM
IMPA:632706
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
632707 TOOL WITH CARBIDE TIP SINGLE, #32-1 LEFT HAND 13X13X100MM
632707 TOOL WITH CARBIDE TIP SINGLE, #32-1 LEFT HAND 13X13X100MM
IMPA:632707
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
632708 TOOL WITH CARBIDE TIP SINGLE, #32-2 LEFT HAND 16X16X120MM
632708 TOOL WITH CARBIDE TIP SINGLE, #32-2 LEFT HAND 16X16X120MM
IMPA:632708
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
632709 TOOL WITH CARBIDE TIP SINGLE, #32-3 LEFT HAND 19X19X140MM
632709 TOOL WITH CARBIDE TIP SINGLE, #32-3 LEFT HAND 19X19X140MM
IMPA:632709
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
632710 TOOL WITH CARBIDE TIP SINGLE, #32-4 LEFT HAND 25X25X160MM
632710 TOOL WITH CARBIDE TIP SINGLE, #32-4 LEFT HAND 25X25X160MM
IMPA:632710
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
632711 TOOL WITH CARBIDE TIP SINGLE, #32-5 LEFT HAND 25X30X180MM
632711 TOOL WITH CARBIDE TIP SINGLE, #32-5 LEFT HAND 25X30X180MM
IMPA:632711
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
632712 TOOL WITH CARBIDE TIP SINGLE, #32-6 LEFT HAND 30X35X200MM
632712 TOOL WITH CARBIDE TIP SINGLE, #32-6 LEFT HAND 30X35X200MM
IMPA:632712
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
632713 TOOL WITH CARBIDE TIP SINGLE, #33-0 RIGHT HAND 10X10X80MM
632713 TOOL WITH CARBIDE TIP SINGLE, #33-0 RIGHT HAND 10X10X80MM
IMPA:632713
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632714 TOOL WITH CARBIDE TIP SINGLE, #33-1 RIGHT HAND 13X13X100MM
632714 TOOL WITH CARBIDE TIP SINGLE, #33-1 RIGHT HAND 13X13X100MM
IMPA:632714
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632715 TOOL WITH CARBIDE TIP SINGLE, #33-2 RIGHT HAND 16X16X120MM
632715 TOOL WITH CARBIDE TIP SINGLE, #33-2 RIGHT HAND 16X16X120MM
IMPA:632715
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632716 TOOL WITH CARBIDE TIP SINGLE, #33-3 RIGHT HAND 19X19X140MM
632716 TOOL WITH CARBIDE TIP SINGLE, #33-3 RIGHT HAND 19X19X140MM
IMPA:632716
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632717 TOOL WITH CARBIDE TIP SINGLE, #33-4 RIGHT HAND 25X25X160MM
632717 TOOL WITH CARBIDE TIP SINGLE, #33-4 RIGHT HAND 25X25X160MM
IMPA:632717
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632718 TOOL WITH CARBIDE TIP SINGLE, #33-5 RIGHT HAND 25X30X180MM
632718 TOOL WITH CARBIDE TIP SINGLE, #33-5 RIGHT HAND 25X30X180MM
IMPA:632718
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632719 TOOL WITH CARBIDE TIP SINGLE, #33-6 RIGHT HAND 30X35X200MM
632719 TOOL WITH CARBIDE TIP SINGLE, #33-6 RIGHT HAND 30X35X200MM
IMPA:632719
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 33 Right
632720 TOOL WITH CARBIDE TIP SINGLE, #34-0 LEFT HAND 10X10X80MM
632720 TOOL WITH CARBIDE TIP SINGLE, #34-0 LEFT HAND 10X10X80MM
IMPA:632720
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632721 TOOL WITH CARBIDE TIP SINGLE, #34-1 LEFT HAND 13X13X100MM
632721 TOOL WITH CARBIDE TIP SINGLE, #34-1 LEFT HAND 13X13X100MM
IMPA:632721
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632722 TOOL WITH CARBIDE TIP SINGLE, #34-2 LEFT HAND 16X16X120MM
632722 TOOL WITH CARBIDE TIP SINGLE, #34-2 LEFT HAND 16X16X120MM
IMPA:632722
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632723 TOOL WITH CARBIDE TIP SINGLE, #34-3 LEFT HAND 19X19X140MM
632723 TOOL WITH CARBIDE TIP SINGLE, #34-3 LEFT HAND 19X19X140MM
IMPA:632723
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632724 TOOL WITH CARBIDE TIP SINGLE, #34-4 LEFT HAND 25X25X160MM
632724 TOOL WITH CARBIDE TIP SINGLE, #34-4 LEFT HAND 25X25X160MM
IMPA:632724
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632725 TOOL WITH CARBIDE TIP SINGLE, #34-5 LEFT HAND 25X30X180MM
632725 TOOL WITH CARBIDE TIP SINGLE, #34-5 LEFT HAND 25X30X180MM
IMPA:632725
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632726 TOOL WITH CARBIDE TIP SINGLE, #34-6 LEFT HAND 30X35X200MM
632726 TOOL WITH CARBIDE TIP SINGLE, #34-6 LEFT HAND 30X35X200MM
IMPA:632726
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 34 Left
632727 TOOL WITH CARBIDE TIP SINGLE, #35-0 STRAIGHT 10X10X80MM
632727 TOOL WITH CARBIDE TIP SINGLE, #35-0 STRAIGHT 10X10X80MM
IMPA:632727
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632728 TOOL WITH CARBIDE TIP SINGLE, #35-1 STRAIGHT 13X13X100MM
632728 TOOL WITH CARBIDE TIP SINGLE, #35-1 STRAIGHT 13X13X100MM
IMPA:632728
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632729 TOOL WITH CARBIDE TIP SINGLE, #35-2 STRAIGHT 16X16X120MM
632729 TOOL WITH CARBIDE TIP SINGLE, #35-2 STRAIGHT 16X16X120MM
IMPA:632729
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632730 TOOL WITH CARBIDE TIP SINGLE, #35-3 STRAIGHT 19X19X140MM
632730 TOOL WITH CARBIDE TIP SINGLE, #35-3 STRAIGHT 19X19X140MM
IMPA:632730
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632731 TOOL WITH CARBIDE TIP SINGLE, #35-4 STRAIGHT 25X25X160MM
632731 TOOL WITH CARBIDE TIP SINGLE, #35-4 STRAIGHT 25X25X160MM
IMPA:632731
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632732 TOOL WITH CARBIDE TIP SINGLE, #35-5 STRAIGHT 25X30X180MM
632732 TOOL WITH CARBIDE TIP SINGLE, #35-5 STRAIGHT 25X30X180MM
IMPA:632732
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632733 TOOL WITH CARBIDE TIP SINGLE, #35-6 STRAIGHT 30X35X200MM
632733 TOOL WITH CARBIDE TIP SINGLE, #35-6 STRAIGHT 30X35X200MM
IMPA:632733
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
632734 TOOL WITH CARBIDE TIP SINGLE, #36-0 STRAIGHT 10X10X80MM
632734 TOOL WITH CARBIDE TIP SINGLE, #36-0 STRAIGHT 10X10X80MM
IMPA:632734
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632735 TOOL WITH CARBIDE TIP SINGLE, #36-1 STRAIGHT 13X13X100MM
632735 TOOL WITH CARBIDE TIP SINGLE, #36-1 STRAIGHT 13X13X100MM
IMPA:632735
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632736 TOOL WITH CARBIDE TIP SINGLE, #36-2 STRAIGHT 16X16X120MM
632736 TOOL WITH CARBIDE TIP SINGLE, #36-2 STRAIGHT 16X16X120MM
IMPA:632736
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632737 TOOL WITH CARBIDE TIP SINGLE, #36-3 STRAIGHT 19X19X140MM
632737 TOOL WITH CARBIDE TIP SINGLE, #36-3 STRAIGHT 19X19X140MM
IMPA:632737
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632738 TOOL WITH CARBIDE TIP SINGLE, #36-4 STRAIGHT 25X25X160MM
632738 TOOL WITH CARBIDE TIP SINGLE, #36-4 STRAIGHT 25X25X160MM
IMPA:632738
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632739 TOOL WITH CARBIDE TIP SINGLE, #36-5 STRAIGHT 25X30X180MM
632739 TOOL WITH CARBIDE TIP SINGLE, #36-5 STRAIGHT 25X30X180MM
IMPA:632739
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632740 TOOL WITH CARBIDE TIP SINGLE, #36-6 STRAIGHT 30X35X200MM
632740 TOOL WITH CARBIDE TIP SINGLE, #36-6 STRAIGHT 30X35X200MM
IMPA:632740
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
632741 TOOL WITH CARBIDE TIP SINGLE, #37-1 RIGHT HAND 13X13X100MM
632741 TOOL WITH CARBIDE TIP SINGLE, #37-1 RIGHT HAND 13X13X100MM
IMPA:632741
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
632742 TOOL WITH CARBIDE TIP SINGLE, #37-2 RIGHT HAND 16X16X120MM
632742 TOOL WITH CARBIDE TIP SINGLE, #37-2 RIGHT HAND 16X16X120MM
IMPA:632742
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
632743 TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND 19X19X140MM
632743 TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND 19X19X140MM
IMPA:632743
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
632744 TOOL WITH CARBIDE TIP SINGLE, #37-4 RIGHT HAND 25X25X160MM
632744 TOOL WITH CARBIDE TIP SINGLE, #37-4 RIGHT HAND 25X25X160MM
IMPA:632744
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
632745 TOOL WITH CARBIDE TIP SINGLE, #37-5 RIGHT HAND 25X30X180MM
632745 TOOL WITH CARBIDE TIP SINGLE, #37-5 RIGHT HAND 25X30X180MM
IMPA:632745
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
632746 TOOL WITH CARBIDE TIP SINGLE, #37-6 RIGHT HAND 30X35X200MM
632746 TOOL WITH CARBIDE TIP SINGLE, #37-6 RIGHT HAND 30X35X200MM
IMPA:632746
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
632747 TOOL WITH CARBIDE TIP SINGLE, #38-1 LEFT HAND 13X13X100MM
632747 TOOL WITH CARBIDE TIP SINGLE, #38-1 LEFT HAND 13X13X100MM
IMPA:632747
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
632748 TOOL WITH CARBIDE TIP SINGLE, #38-2 LEFT HAND 16X16X120MM
632748 TOOL WITH CARBIDE TIP SINGLE, #38-2 LEFT HAND 16X16X120MM
IMPA:632748
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
632749 TOOL WITH CARBIDE TIP SINGLE, #38-3 LEFT HAND 19X19X140MM
632749 TOOL WITH CARBIDE TIP SINGLE, #38-3 LEFT HAND 19X19X140MM
IMPA:632749
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
632750 TOOL WITH CARBIDE TIP SINGLE, #38-4 LEFT HAND 25X25X160MM
632750 TOOL WITH CARBIDE TIP SINGLE, #38-4 LEFT HAND 25X25X160MM
IMPA:632750
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
632751 TOOL WITH CARBIDE TIP SINGLE, #38-5 LEFT HAND 25X30X180MM
632751 TOOL WITH CARBIDE TIP SINGLE, #38-5 LEFT HAND 25X30X180MM
IMPA:632751
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
632752 TOOL WITH CARBIDE TIP SINGLE, #38-6 LEFT HAND 30X35X200MM
632752 TOOL WITH CARBIDE TIP SINGLE, #38-6 LEFT HAND 30X35X200MM
IMPA:632752
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
632753 TOOL WITH CARBIDE TIP SINGLE, #39-0 RIGHT HAND 10X10X80MM
632753 TOOL WITH CARBIDE TIP SINGLE, #39-0 RIGHT HAND 10X10X80MM
IMPA:632753
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632754 TOOL WITH CARBIDE TIP SINGLE, #39-1 RIGHT HAND 13X13X100MM
632754 TOOL WITH CARBIDE TIP SINGLE, #39-1 RIGHT HAND 13X13X100MM
IMPA:632754
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632755 TOOL WITH CARBIDE TIP SINGLE, #39-2 RIGHT HAND 16X16X120MM
632755 TOOL WITH CARBIDE TIP SINGLE, #39-2 RIGHT HAND 16X16X120MM
IMPA:632755
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632756 TOOL WITH CARBIDE TIP SINGLE, #39-3 RIGHT HAND 19X19X140MM
632756 TOOL WITH CARBIDE TIP SINGLE, #39-3 RIGHT HAND 19X19X140MM
IMPA:632756
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632757 TOOL WITH CARBIDE TIP SINGLE, #39-4 RIGHT HAND 25X25X160MM
632757 TOOL WITH CARBIDE TIP SINGLE, #39-4 RIGHT HAND 25X25X160MM
IMPA:632757
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632758 TOOL WITH CARBIDE TIP SINGLE, #39-5 RIGHT HAND 25X30X180MM
632758 TOOL WITH CARBIDE TIP SINGLE, #39-5 RIGHT HAND 25X30X180MM
IMPA:632758
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632759 TOOL WITH CARBIDE TIP SINGLE, #39-6 RIGHT HAND 30X35X200MM
632759 TOOL WITH CARBIDE TIP SINGLE, #39-6 RIGHT HAND 30X35X200MM
IMPA:632759
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
632760 TOOL WITH CARBIDE TIP SINGLE, #40-0 LEFT HAND 10X10X80MM
632760 TOOL WITH CARBIDE TIP SINGLE, #40-0 LEFT HAND 10X10X80MM
IMPA:632760
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632761 TOOL WITH CARBIDE TIP SINGLE, #40-1 LEFT HAND 13X13X100MM
632761 TOOL WITH CARBIDE TIP SINGLE, #40-1 LEFT HAND 13X13X100MM
IMPA:632761
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632762 TOOL WITH CARBIDE TIP SINGLE, #40-2 LEFT HAND 16X16X120MM
632762 TOOL WITH CARBIDE TIP SINGLE, #40-2 LEFT HAND 16X16X120MM
IMPA:632762
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632763 TOOL WITH CARBIDE TIP SINGLE, #40-3 LEFT HAND 19X19X140MM
632763 TOOL WITH CARBIDE TIP SINGLE, #40-3 LEFT HAND 19X19X140MM
IMPA:632763
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632764 TOOL WITH CARBIDE TIP SINGLE, #40-4 LEFT HAND 25X25X160MM
632764 TOOL WITH CARBIDE TIP SINGLE, #40-4 LEFT HAND 25X25X160MM
IMPA:632764
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632765 TOOL WITH CARBIDE TIP SINGLE, #40-5 LEFT HAND 25X30X180MM
632765 TOOL WITH CARBIDE TIP SINGLE, #40-5 LEFT HAND 25X30X180MM
IMPA:632765
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632766 TOOL WITH CARBIDE TIP SINGLE, #40-6 LEFT HAND 30X35X200MM
632766 TOOL WITH CARBIDE TIP SINGLE, #40-6 LEFT HAND 30X35X200MM
IMPA:632766
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 40 Left
632767 TOOL WITH CARBIDE TIP SINGLE, #41-1 RIGHT HAND 13X13X100MM
632767 TOOL WITH CARBIDE TIP SINGLE, #41-1 RIGHT HAND 13X13X100MM
IMPA:632767
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 41 Right
632768 TOOL WITH CARBIDE TIP SINGLE, #41-2 RIGHT HAND 16X16X120MM
632768 TOOL WITH CARBIDE TIP SINGLE, #41-2 RIGHT HAND 16X16X120MM
IMPA:632768
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 41 Right
632769 TOOL WITH CARBIDE TIP SINGLE, #41-3 RIGHT HAND 19X19X140MM
632769 TOOL WITH CARBIDE TIP SINGLE, #41-3 RIGHT HAND 19X19X140MM
IMPA:632769
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 41 Right
632770 TOOL WITH CARBIDE TIP SINGLE, #41-4 RIGHT HAND 25X25X160MM
632770 TOOL WITH CARBIDE TIP SINGLE, #41-4 RIGHT HAND 25X25X160MM
IMPA:632770
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 41 Right
632771 TOOL WITH CARBIDE TIP SINGLE, #41-5 RIGHT HAND 25X30X180MM
632771 TOOL WITH CARBIDE TIP SINGLE, #41-5 RIGHT HAND 25X30X180MM
IMPA:632771
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 41 Right
632772 TOOL WITH CARBIDE TIP SINGLE, #41-6 RIGHT HAND 30X35X200MM
632772 TOOL WITH CARBIDE TIP SINGLE, #41-6 RIGHT HAND 30X35X200MM
IMPA:632772
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 41 Right
632773 TOOL WITH CARBIDE TIP SINGLE, #42-1 LEFT HAND 13X13X100MM
632773 TOOL WITH CARBIDE TIP SINGLE, #42-1 LEFT HAND 13X13X100MM
IMPA:632773
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 42 Left
632774 TOOL WITH CARBIDE TIP SINGLE, #42-2 LEFT HAND 16X16X120MM
632774 TOOL WITH CARBIDE TIP SINGLE, #42-2 LEFT HAND 16X16X120MM
IMPA:632774
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 42 Left
632775 TOOL WITH CARBIDE TIP SINGLE, #42-3 LEFT HAND 19X19X140MM
632775 TOOL WITH CARBIDE TIP SINGLE, #42-3 LEFT HAND 19X19X140MM
IMPA:632775
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 42 Left
632776 TOOL WITH CARBIDE TIP SINGLE, #42-4 LEFT HAND 25X25X160MM
632776 TOOL WITH CARBIDE TIP SINGLE, #42-4 LEFT HAND 25X25X160MM
IMPA:632776
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 42 Left
632777 TOOL WITH CARBIDE TIP SINGLE, #42-5 LEFT HAND 25X30X180MM
632777 TOOL WITH CARBIDE TIP SINGLE, #42-5 LEFT HAND 25X30X180MM
IMPA:632777
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 42 Left
632778 TOOL WITH CARBIDE TIP SINGLE, #42-6 LEFT HAND 30X35X200MM
632778 TOOL WITH CARBIDE TIP SINGLE, #42-6 LEFT HAND 30X35X200MM
IMPA:632778
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 42 Left
632779 TOOL WITH CARBIDE TIP SINGLE, #43-1 STRAIGHT 10X16X100MM
632779 TOOL WITH CARBIDE TIP SINGLE, #43-1 STRAIGHT 10X16X100MM
IMPA:632779
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
632780 TOOL WITH CARBIDE TIP SINGLE, #43-2 STRAIGHT 13X19X120MM
632780 TOOL WITH CARBIDE TIP SINGLE, #43-2 STRAIGHT 13X19X120MM
IMPA:632780
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
632781 TOOL WITH CARBIDE TIP SINGLE, #43-3 STRAIGHT 16X22X140MM
632781 TOOL WITH CARBIDE TIP SINGLE, #43-3 STRAIGHT 16X22X140MM
IMPA:632781
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
632782 TOOL WITH CARBIDE TIP SINGLE, #43-4 STRAIGHT 19X25X160MM
632782 TOOL WITH CARBIDE TIP SINGLE, #43-4 STRAIGHT 19X25X160MM
IMPA:632782
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
632783 TOOL WITH CARBIDE TIP SINGLE, #43-5 STRAIGHT 22X32X180MM
632783 TOOL WITH CARBIDE TIP SINGLE, #43-5 STRAIGHT 22X32X180MM
IMPA:632783
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
632784 TOOL WITH CARBIDE TIP SINGLE, #43-6 STRAIGHT 25X38X200MM
632784 TOOL WITH CARBIDE TIP SINGLE, #43-6 STRAIGHT 25X38X200MM
IMPA:632784
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
632785 TOOL WITH CARBIDE TIP SINGLE, #45-1 RIGHT HAND 13X13X140MM
632785 TOOL WITH CARBIDE TIP SINGLE, #45-1 RIGHT HAND 13X13X140MM
IMPA:632785
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
632786 TOOL WITH CARBIDE TIP SINGLE, #45-2 RIGHT HAND 16X16X160MM
632786 TOOL WITH CARBIDE TIP SINGLE, #45-2 RIGHT HAND 16X16X160MM
IMPA:632786
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
632787 TOOL WITH CARBIDE TIP SINGLE, #45-3 RIGHT HAND 19X19X190MM
632787 TOOL WITH CARBIDE TIP SINGLE, #45-3 RIGHT HAND 19X19X190MM
IMPA:632787
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
632788 TOOL WITH CARBIDE TIP SINGLE, #45-4 RIGHT HAND 25X25X230MM
632788 TOOL WITH CARBIDE TIP SINGLE, #45-4 RIGHT HAND 25X25X230MM
IMPA:632788
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
632790 TOOL WITH CARBIDE TIP SINGLE, #46-1 LEFT HAND 13X13X140MM
632790 TOOL WITH CARBIDE TIP SINGLE, #46-1 LEFT HAND 13X13X140MM
IMPA:632790
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
632791 TOOL WITH CARBIDE TIP SINGLE, #46-2 LEFT HAND 16X16X160MM
632791 TOOL WITH CARBIDE TIP SINGLE, #46-2 LEFT HAND 16X16X160MM
IMPA:632791
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
632792 TOOL WITH CARBIDE TIP SINGLE, #46-3 LEFT HAND 19X19X190MM
632792 TOOL WITH CARBIDE TIP SINGLE, #46-3 LEFT HAND 19X19X190MM
IMPA:632792
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
632793 TOOL WITH CARBIDE TIP SINGLE, #46-4 LEFT HAND 25X25X230MM
632793 TOOL WITH CARBIDE TIP SINGLE, #46-4 LEFT HAND 25X25X230MM
IMPA:632793
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
632794 TOOL WITH CARBIDE TIP SINGLE, #47-1 RIGHT HAND 13X13X100MM
632794 TOOL WITH CARBIDE TIP SINGLE, #47-1 RIGHT HAND 13X13X100MM
IMPA:632794
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
632795 TOOL WITH CARBIDE TIP SINGLE, #47-2 RIGHT HAND 16X16X160MM
632795 TOOL WITH CARBIDE TIP SINGLE, #47-2 RIGHT HAND 16X16X160MM
IMPA:632795
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
632796 TOOL WITH CARBIDE TIP SINGLE, #47-3 RIGHT HAND 19X19X190MM
632796 TOOL WITH CARBIDE TIP SINGLE, #47-3 RIGHT HAND 19X19X190MM
IMPA:632796
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
632797 TOOL WITH CARBIDE TIP SINGLE, #47-4 RIGHT HAND 25X25X230MM
632797 TOOL WITH CARBIDE TIP SINGLE, #47-4 RIGHT HAND 25X25X230MM
IMPA:632797
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
632798 TOOL WITH CARBIDE TIP SINGLE, #48-1 LEFT HAND 13X13X100MM
632798 TOOL WITH CARBIDE TIP SINGLE, #48-1 LEFT HAND 13X13X100MM
IMPA:632798
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
632799 TOOL WITH CARBIDE TIP SINGLE, #48-2 LEFT HAND 16X16X160MM
632799 TOOL WITH CARBIDE TIP SINGLE, #48-2 LEFT HAND 16X16X160MM
IMPA:632799
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
632801 TOOL WITH CARBIDE TIP SINGLE, #48-3 LEFT HAND 19X19X190MM
632801 TOOL WITH CARBIDE TIP SINGLE, #48-3 LEFT HAND 19X19X190MM
IMPA:632801
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
632802 TOOL WITH CARBIDE TIP SINGLE, #48-4 LEFT HAND 25X25X230MM
632802 TOOL WITH CARBIDE TIP SINGLE, #48-4 LEFT HAND 25X25X230MM
IMPA:632802
MTML UOM:PCE
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
About
Support
IMPA
Suppliers
Brands
Categories
Countries
TradeNet
Terms of Use
Privacy Policy
Cookie Policy

© 2025 ShipServ Limited