Karl Fischer Moisture Titrators

652831 TITRATOR MOISTURE KARL FISCHER, VOLMETRIC MOISTURE MKV-710M

IMPA:652831

MTML UOM:SET

Up to 4 titrators , Automatic potentiometric titrator (AT-710B) or Coulometric (MKC-710B) or additional Volumetric (MKV-710B) Karl Fischer moisture titrator can be connected and simultaneous measurement is possible. Titrant Information is stored in an IC chip in the burette unit (Smart burette). The main control unit and a titrator are separately located by wireless (Bluetooth(R)). Large color TFT-LCD with a touch panel (8.4-inch). Two different user levels and permissions. Measurement results are converted to PDF and can be stored in a USB flash drive. When using a patented scan mode (ADP-611) automatically determines the optimal evaporation temperature. End point detection by compensating liquid resistance is adopted. Can resume titration automatically after interruption. Automatic solvent change unit is included.

652833 TITRATOR MOISTURE KARL FISCHER, COULOMETRIC MKC-710M

IMPA:652833

MTML UOM:SET

Up to 4 titrators , Automatic potentiometric titrator (AT-710B) or Coulometric (MKC-710B) or additional Volumetric (MKV-710B) Karl Fischer moisture titrator can be connected and simultaneous measurement is possible. Titrant Information is stored in an IC chip in the burette unit (Smart burette). The main control unit and a titrator are separately located by wireless (Bluetooth(R)). Large color TFT-LCD with a touch panel (8.4-inch). Two different user levels and permissions. Measurement results are converted to PDF and can be stored in a USB flash drive. When using a patented scan mode (ADP-611) automatically determines the optimal evaporation temperature. End point detection by compensating liquid resistance is adopted. Can resume titration automatically after interruption. Automatic solvent change unit is included.

652834 TITRATOR MOISTURE KARL FISCHER, HYBRID MKH-700

IMPA:652834

MTML UOM:SET

Equipped such as high-speed & high-precision measurement by "Hybrid titration method" which uses both "Volumetric titration method" and "Coulometric titration method", and "Electrolytic Factor Measurement System" which does not require pure water for factor determination. "Hybrid titration method" automatically switches between the parallel measurement by "Volumetric titration method" and "Coulometric titration method" by monitoring moisture content in titration cell with high-speed & high-precision measurement, therefore can measure without adjusting the sample amount. With just pressing one button, the "Electrolytic Factor Measurement System" automatically performs the factor determination of Karl Fischer reagent, and save the time & work without using pure water. To make the inner burette and diaphragm separate, although after measuring such as petroleum samples, it is easy to clean the diaphragm inner burette. It is possible to select one method from "Volumetric titration method", "Coulometric titration method", and "Hybrid titration method". It is possible to store the measurement result, method and manage the data as an electronic record.