Carbon Tool Steel Rounds

670901 TOOL STEEL CARBON ROUND SK-3, 10MM 5.5MTR

IMPA:670901

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670902 TOOL STEEL CARBON ROUND SK-3, 11MM 5.5MTR

IMPA:670902

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670903 TOOL STEEL CARBON ROUND SK-3, 12MM 5.5MTR

IMPA:670903

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670904 TOOL STEEL CARBON ROUND SK-3, 13MM 5.5MTR

IMPA:670904

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670905 TOOL STEEL CARBON ROUND SK-3, 14MM 5.5MTR

IMPA:670905

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670906 TOOL STEEL CARBON ROUND SK-3, 15MM 5.5MTR

IMPA:670906

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670907 TOOL STEEL CARBON ROUND SK-3, 16MM 5.5MTR

IMPA:670907

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670908 TOOL STEEL CARBON ROUND SK-3, 17MM 5.5MTR

IMPA:670908

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670909 TOOL STEEL CARBON ROUND SK-3, 18MM 5.5MTR

IMPA:670909

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670910 TOOL STEEL CARBON ROUND SK-3, 19MM 5.5MTR

IMPA:670910

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670911 TOOL STEEL CARBON ROUND SK-3, 20MM 5.5MTR

IMPA:670911

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670912 TOOL STEEL CARBON ROUND SK-3, 21MM 5.5MTR

IMPA:670912

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670913 TOOL STEEL CARBON ROUND SK-3, 22MM 5.5MTR

IMPA:670913

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670914 TOOL STEEL CARBON ROUND SK-3, 23MM 5.5MTR

IMPA:670914

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670915 TOOL STEEL CARBON ROUND SK-3, 24MM 5.5MTR

IMPA:670915

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670916 TOOL STEEL CARBON ROUND SK-3, 25MM 5.5MTR

IMPA:670916

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670917 TOOL STEEL CARBON ROUND SK-3, 26MM 5.5MTR

IMPA:670917

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670918 TOOL STEEL CARBON ROUND SK-3, 27MM 5.5MTR

IMPA:670918

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670919 TOOL STEEL CARBON ROUND SK-3, 28MM 5.5MTR

IMPA:670919

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670920 TOOL STEEL CARBON ROUND SK-3, 30MM 5.5MTR

IMPA:670920

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670921 TOOL STEEL CARBON ROUND SK-3, 32MM 5.5MTR

IMPA:670921

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670922 TOOL STEEL CARBON ROUND SK-3, 34MM 5.5MTR

IMPA:670922

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670923 TOOL STEEL CARBON ROUND SK-3, 36MM 5.5MTR

IMPA:670923

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670924 TOOL STEEL CARBON ROUND SK-3, 38MM 5.5MTR

IMPA:670924

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670925 TOOL STEEL CARBON ROUND SK-3, 40MM 5.5MTR

IMPA:670925

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670951 TOOL STEEL CARBON ROUND SK-5, 10MM 5.5MTR

IMPA:670951

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670952 TOOL STEEL CARBON ROUND SK-5, 11MM 5.5MTR

IMPA:670952

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670953 TOOL STEEL CARBON ROUND SK-5, 12MM 5.5MTR

IMPA:670953

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670954 TOOL STEEL CARBON ROUND SK-5, 13MM 5.5MTR

IMPA:670954

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670955 TOOL STEEL CARBON ROUND SK-5, 14MM 5.5MTR

IMPA:670955

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670956 TOOL STEEL CARBON ROUND SK-5, 15MM 5.5MTR

IMPA:670956

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670957 TOOL STEEL CARBON ROUND SK-5, 16MM 5.5MTR

IMPA:670957

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670958 TOOL STEEL CARBON ROUND SK-5, 17MM 5.5MTR

IMPA:670958

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670959 TOOL STEEL CARBON ROUND SK-5, 18MM 5.5MTR

IMPA:670959

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670960 TOOL STEEL CARBON ROUND SK-5, 19MM 5.5MTR

IMPA:670960

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670961 TOOL STEEL CARBON ROUND SK-5, 20MM 5.5MTR

IMPA:670961

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670962 TOOL STEEL CARBON ROUND SK-5, 21MM 5.5MTR

IMPA:670962

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670963 TOOL STEEL CARBON ROUND SK-5, 22MM 5.5MTR

IMPA:670963

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670964 TOOL STEEL CARBON ROUND SK-5, 23MM 5.5MTR

IMPA:670964

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670965 TOOL STEEL CARBON ROUND SK-5, 24MM 5.5MTR

IMPA:670965

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670966 TOOL STEEL CARBON ROUND SK-5, 25MM 5.5MTR

IMPA:670966

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670967 TOOL STEEL CARBON ROUND SK-5, 26MM 5.5MTR

IMPA:670967

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670968 TOOL STEEL CARBON ROUND SK-5, 27MM 5.5MTR

IMPA:670968

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670969 TOOL STEEL CARBON ROUND SK-5, 28MM 5.5MTR

IMPA:670969

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670970 TOOL STEEL CARBON ROUND SK-5, 30MM 5.5MTR

IMPA:670970

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670971 TOOL STEEL CARBON ROUND SK-5, 32MM 5.5MTR

IMPA:670971

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670972 TOOL STEEL CARBON ROUND SK-5, 34MM 5.5MTR

IMPA:670972

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670973 TOOL STEEL CARBON ROUND SK-5, 36MM 5.5MTR

IMPA:670973

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670974 TOOL STEEL CARBON ROUND SK-5, 38MM 5.5MTR

IMPA:670974

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

670975 TOOL STEEL CARBON ROUND SK-5, 40MM 5.5MTR

IMPA:670975

MTML UOM:LN

Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.

671591 TOOL STEEL CARBON ROUND SK-3, 10MM 3MTR

IMPA:671591

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671592 TOOL STEEL CARBON ROUND SK-3, 11MM 3MTR

IMPA:671592

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671593 TOOL STEEL CARBON ROUND SK-3, 12MM 3MTR

IMPA:671593

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671594 TOOL STEEL CARBON ROUND SK-3, 13MM 3MTR

IMPA:671594

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671595 TOOL STEEL CARBON ROUND SK-3, 14MM 3MTR

IMPA:671595

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671596 TOOL STEEL CARBON ROUND SK-3, 15MM 3MTR

IMPA:671596

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671597 TOOL STEEL CARBON ROUND SK-3, 16MM 3MTR

IMPA:671597

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671598 TOOL STEEL CARBON ROUND SK-3, 17MM 3MTR

IMPA:671598

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671599 TOOL STEEL CARBON ROUND SK-3, 18MM 3MTR

IMPA:671599

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671600 TOOL STEEL CARBON ROUND SK-3, 19MM 3MTR

IMPA:671600

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671620 TOOL STEEL CARBON ROUND SK-3, 20MM 3MTR

IMPA:671620

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671621 TOOL STEEL CARBON ROUND SK-3, 21MM 3MTR

IMPA:671621

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671622 TOOL STEEL CARBON ROUND SK-3, 22MM 3MTR

IMPA:671622

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671623 TOOL STEEL CARBON ROUND SK-3, 23MM 3MTR

IMPA:671623

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671624 TOOL STEEL CARBON ROUND SK-3, 24MM 3MTR

IMPA:671624

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671625 TOOL STEEL CARBON ROUND SK-3, 25MM 3MTR

IMPA:671625

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671626 TOOL STEEL CARBON ROUND SK-3, 26MM 3MTR

IMPA:671626

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671627 TOOL STEEL CARBON ROUND SK-3, 27MM 3MTR

IMPA:671627

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671628 TOOL STEEL CARBON ROUND SK-3, 28MM 3MTR

IMPA:671628

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671629 TOOL STEEL CARBON ROUND SK-3, 30MM 3MTR

IMPA:671629

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671630 TOOL STEEL CARBON ROUND SK-3, 32MM 3MTR

IMPA:671630

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671631 TOOL STEEL CARBON ROUND SK-3, 34MM 3MTR

IMPA:671631

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671632 TOOL STEEL CARBON ROUND SK-3, 36MM 3MTR

IMPA:671632

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671633 TOOL STEEL CARBON ROUND SK-3, 38MM 3MTR

IMPA:671633

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671634 TOOL STEEL CARBON ROUND SK-3, 40MM 3MTR

IMPA:671634

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671635 TOOL STEEL CARBON ROUND SK-5, 10MM 3MTR

IMPA:671635

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671636 TOOL STEEL CARBON ROUND SK-5, 11MM 3MTR

IMPA:671636

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671637 TOOL STEEL CARBON ROUND SK-5, 12MM 3MTR

IMPA:671637

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671638 TOOL STEEL CARBON ROUND SK-5, 13MM 3MTR

IMPA:671638

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671639 TOOL STEEL CARBON ROUND SK-5, 14MM 3MTR

IMPA:671639

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671640 TOOL STEEL CARBON ROUND SK-5, 15MM 3MTR

IMPA:671640

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671641 TOOL STEEL CARBON ROUND SK-5, 16MM 3MTR

IMPA:671641

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671642 TOOL STEEL CARBON ROUND SK-5, 17MM 3MTR

IMPA:671642

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671643 TOOL STEEL CARBON ROUND SK-5, 18MM 3MTR

IMPA:671643

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671644 TOOL STEEL CARBON ROUND SK-5, 19MM 3MTR

IMPA:671644

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671645 TOOL STEEL CARBON ROUND SK-5, 20MM 3MTR

IMPA:671645

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671646 TOOL STEEL CARBON ROUND SK-5, 21MM 3MTR

IMPA:671646

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671647 TOOL STEEL CARBON ROUND SK-5, 22MM 3MTR

IMPA:671647

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671648 TOOL STEEL CARBON ROUND SK-5, 23MM 3MTR

IMPA:671648

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671649 TOOL STEEL CARBON ROUND SK-5, 24MM 3MTR

IMPA:671649

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671650 TOOL STEEL CARBON ROUND SK-5, 25MM 3MTR

IMPA:671650

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671651 TOOL STEEL CARBON ROUND SK-5, 26MM 3MTR

IMPA:671651

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671652 TOOL STEEL CARBON ROUND SK-5, 27MM 3MTR

IMPA:671652

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671653 TOOL STEEL CARBON ROUND SK-5, 28MM 3MTR

IMPA:671653

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671654 TOOL STEEL CARBON ROUND SK-5, 30MM 3MTR

IMPA:671654

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671655 TOOL STEEL CARBON ROUND SK-5, 32MM 3MTR

IMPA:671655

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671656 TOOL STEEL CARBON ROUND SK-5, 34MM 3MTR

IMPA:671656

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671657 TOOL STEEL CARBON ROUND SK-5, 36MM 3MTR

IMPA:671657

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671658 TOOL STEEL CARBON ROUND SK-5, 38MM 3MTR

IMPA:671658

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.

671659 TOOL STEEL CARBON ROUND SK-5, 40MM 3MTR

IMPA:671659

MTML UOM:LN

Europe Standard Length. Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. If you require a length other than the standard mentioned, please specify when ordering.