Tubes Aluminium Brass
711701 TUBE ALUMI-BRASS 15A (METRIC), 20X1MM
IMPA:711701
MTML UOM:KGM
711702 TUBE ALUMI-BRASS 20A (METRIC), 25X1.5MM
IMPA:711702
MTML UOM:KGM
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711703 TUBE ALUMI-BRASS 25A (METRIC), 30X1.5MM
IMPA:711703
MTML UOM:KGM
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711704 TUBE ALUMI-BRASS 32A (METRIC), 38X1.5MM
IMPA:711704
MTML UOM:KGM
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711705 TUBE ALUMI-BRASS 40A (METRIC), 44.5X1.5MM
IMPA:711705
MTML UOM:KGM
711706 TUBE ALUMI-BRASS 50A (METRIC), 57X1.5MM
IMPA:711706
MTML UOM:KGM
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711711 TUBE ALUMI-BRASS 15A (INCH), 15.13X1.21MM
IMPA:711711
MTML UOM:KGM
711712 TUBE ALUMI-BRASS 20A (INCH), 21.48X1.21MM
IMPA:711712
MTML UOM:KGM
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711713 TUBE ALUMI-BRASS 25A (INCH), 28.24X1.42MM
IMPA:711713
MTML UOM:KGM
711714 TUBE ALUMI-BRASS 32A (INCH), 34.59X1.42MM
IMPA:711714
MTML UOM:KGM
711715 TUBE ALUMI-BRASS 40A (INCH), 40.94X1.42MM
IMPA:711715
MTML UOM:KGM
711716 TUBE ALUMI-BRASS 50A (INCH), 54.05X1.62MM
IMPA:711716
MTML UOM:KGM
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711721 TUBE ALUMI-BRASS 15A (METRIC), 20X1MM
IMPA:711721
MTML UOM:MTR
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711722 TUBE ALUMI-BRASS 20A (METRIC), 25X1.5MM
IMPA:711722
MTML UOM:MTR
711723 TUBE ALUMI-BRASS 25A (METRIC), 30X1.5MM
IMPA:711723
MTML UOM:MTR
711724 TUBE ALUMI-BRASS 32A (METRIC), 38X1.5MM
IMPA:711724
MTML UOM:MTR
711725 TUBE ALUMI-BRASS 40A (METRIC), 44.5X1.5MM
IMPA:711725
MTML UOM:MTR
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711726 TUBE ALUMI-BRASS 50A (METRIC), 57X1.5MM
IMPA:711726
MTML UOM:MTR
711731 TUBE ALUMI-BRASS 15A (INCH), 15.13X1.21MM
IMPA:711731
MTML UOM:MTR
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711732 TUBE ALUMI-BRASS 20A (INCH), 21.48X1.21MM
IMPA:711732
MTML UOM:MTR
711733 TUBE ALUMI-BRASS 25A (INCH), 28.24X1.42MM
IMPA:711733
MTML UOM:MTR
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711734 TUBE ALUMI-BRASS 32A (INCH), 34.59X1.42MM
IMPA:711734
MTML UOM:MTR
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711735 TUBE ALUMI-BRASS 40A (INCH), 40.94X1.42MM
IMPA:711735
MTML UOM:MTR
Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.
711736 TUBE ALUMI-BRASS 50A (INCH), 54.05X1.62MM
IMPA:711736
MTML UOM:MTR
© 2025 ShipServ Limited