Thrust Ball Bearings Series 52300

773761 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52305

IMPA:773761

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773762 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52306

IMPA:773762

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773763 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52307

IMPA:773763

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773764 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52308

IMPA:773764

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773765 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52309

IMPA:773765

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773766 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52310

IMPA:773766

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773767 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52311

IMPA:773767

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773768 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52312

IMPA:773768

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773769 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52313

IMPA:773769

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773770 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52314

IMPA:773770

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773771 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52315

IMPA:773771

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773772 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52316

IMPA:773772

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773773 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52317

IMPA:773773

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773774 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52318

IMPA:773774

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773775 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52320

IMPA:773775

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773776 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52322

IMPA:773776

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat

773777 BALL BEARING DOUBLE THRUST, WITH FLAT SEAT NO.52324

IMPA:773777

MTML UOM:PCE

Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 52300. With Flat Seat