Faceshield Frames and Visors

310502 FRAME WITH DEBRIS CONTROL MSA, 10115730 F/SLOTTED CAPS V-GARD

IMPA:310502

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310503 FRAME W/DEBRIS CONTROL 10115821, MSA FOR ELEVATED TEMP & V-GARD

IMPA:310503

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310504 FRAME W/OUT DEBRIS CONTROL MSA, 10121266 F/SLOTTED CAPS V-GARD

IMPA:310504

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310505 FRAME W/OUT DEBRIS CONTROL MSA, 10121267 F/SLOTTED CAPS V-GARD

IMPA:310505

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310506 FRAME UNIVER. W/DEBRIS CONTROL, MSA 10115822 FOR CAPS V-GARD

IMPA:310506

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310507 FRAME UNIVERSAL MSA 10121268, W/O DEBRIS CONTROL F/V-GARD

IMPA:310507

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310508 FRAME UNIVER. W/DEBRIS CONTROL, ELEVATED TEMP 10116552 F/VGARD

IMPA:310508

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310509 FRAME UNIV. ELEV TEMP 10124426, W/O DEBRIS CONTROL F/MSA VGARD

IMPA:310509

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310510 HEADGEAR FRAME V-GARD 10127061, STANDARD WITHOUT VISOR

IMPA:310510

MTML UOM:PCE

V-Gard Headgear is a brow guard that in combination with the wide range of V-Gard Visors offers a lightweight, comprehensive face protection system. Featuring a durable and stylish HDPE frame and the choice of over 20 visors it is ideal for many applications. With the unique 3-point visor load system visors are fitted or removed easily and quickly. Adjustable to all head sizes and with two comfort sweatbands all day comfort is for sure. Headgear Frames: • Can be used with earmuffs, half-mask respirators and more … • V-shaped alignment guides for easy installation. • Non-metal construction for use in electrical applications. • Optional ET frame is made of heat resistant Nylon in grey with extended crown for additional coverage. • ANSI tested to temperatures of 400˚F (204˚C). • Fits head sizes 52 – 64 cm. Approvals: ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310520 HEADGEAR FRAME V-GARD 10127062, ELEVATED TEMP. WITHOUT VISOR

IMPA:310520

MTML UOM:PCE

V-Gard Headgear is a brow guard that in combination with the wide range of V-Gard Visors offers a lightweight, comprehensive face protection system. Featuring a durable and stylish HDPE frame and the choice of over 20 visors it is ideal for many applications. With the unique 3-point visor load system visors are fitted or removed easily and quickly. Adjustable to all head sizes and with two comfort sweatbands all day comfort is for sure. Headgear Frames: • Can be used with earmuffs, half-mask respirators and more … • V-shaped alignment guides for easy installation. • Non-metal construction for use in electrical applications. • Optional ET frame is made of heat resistant Nylon in grey with extended crown for additional coverage. • ANSI tested to temperatures of 400˚F (204˚C). • Fits head sizes 52 – 64 cm. Approvals: ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310529 FRAME FOR FULL BRIM HATS, V-GARD MSA 10116627

IMPA:310529

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337

310530 FRAME ELEVATED TEMPERATURE MSA, FULL BRIM HATS V-GARD 10116628

IMPA:310530

MTML UOM:PCE

This frame works with any MSA slotted or non-slotted helmet and features our unique sloped design to help material slide off the frame and out of site. Can be used with earmuffs, half-mask respirators and other personal protective equipment. Stays securely on the cap, thanks to the heavy-duty, flat, rubber strap. The elevated temperature model withstands temps up to 350ºF (176ºC). • Sloped design helps material easily slide off the frame • Pivot location for use with earmuffs, half-mask respirators and more • V-shaped alignment guides for easy installation • Replaceable, optional debris control creates tight seal between frame and helmet • Heavy-duty, flat, rubber strap for easy and secure placement of frame on cap • Non-metal construction for use in electrical applications • ET frame is tested to temperatures of 350˚F (176.7˚C), reducing warping, cracking or crazing. • Fits MSA slotted or non-slotted helmets Approvals ANSI/ISEA Z87-1:2010 / CSA Z94 / EN166:2001 389 BT / EN1731-F / AS/NZS 1337