Safety Helmets Slotted V-Gard

310101 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION WHITE

IMPA:310101

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310102 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION BLUE

IMPA:310102

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310103 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION YELLOW

IMPA:310103

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310104 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION ORANGE

IMPA:310104

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310105 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION RED

IMPA:310105

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310106 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION GREEN

IMPA:310106

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310107 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION GRAY

IMPA:310107

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310108 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION HV ORANGE

IMPA:310108

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310109 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION HV LGREEN

IMPA:310109

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310110 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION GOLD

IMPA:310110

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310111 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION EGG BLUE

IMPA:310111

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310112 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION BROWN

IMPA:310112

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310113 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION SILVER

IMPA:310113

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310114 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION TAN

IMPA:310114

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.

310115 HELMET SAFETY SLOTTED V-GARD, W/SATZ-ON SUSPENSION BLACK

IMPA:310115

MTML UOM:PCE

Made of polyethylene shell with suspension system working together as a protection system. MSA V-Gard caps meet or exceed all applicable requirements for a Type I (top impact) helmet as outlined in ANSI Z89.1-2014, Class E, and as outlined in CSA Z94.1-2005, Class E with 1-Touch® and Fas-Trac suspensions. For European versions, Push Key suspension fulfills EN 397:1995. MSA V-Gard caps are not specifically designed to protect against lateral blows from the front, side, or rear. Available in three sizes for cap : small (6-7⅛), standard (6½- 8), and large (7 – 8½), Hat : medium (6½ – 8") only and in a wide choice of colors in order to satisfy your requirements.