Reamers Hand
630601 REAMER HAND STRAIGHT FLUTE, 0.5X30MM
IMPA:630601
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630602 REAMER HAND STRAIGHT FLUTE, 0.8X35MM
IMPA:630602
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630603 REAMER HAND STRAIGHT FLUTE, 1.0X40MM
IMPA:630603
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630604 REAMER HAND STRAIGHT FLUTE, 1.2X45MM
IMPA:630604
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630605 REAMER HAND STRAIGHT FLUTE, 1.5X50MM
IMPA:630605
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630606 REAMER HAND STRAIGHT FLUTE, 1.8X55MM
IMPA:630606
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630607 REAMER HAND STRAIGHT FLUTE, 2.0X60MM
IMPA:630607
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630608 REAMER HAND STRAIGHT FLUTE, 2.2X60MM
IMPA:630608
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630609 REAMER HAND STRAIGHT FLUTE, 2.5X65MM
IMPA:630609
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630610 REAMER HAND STRAIGHT FLUTE, 2.8X65MM
IMPA:630610
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630611 REAMER HAND STRAIGHT FLUTE, 3.0X72MM
IMPA:630611
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630612 REAMER HAND STRAIGHT FLUTE, 3.5X75MM
IMPA:630612
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630613 REAMER HAND STRAIGHT FLUTE, 4.0X80MM
IMPA:630613
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630614 REAMER HAND STRAIGHT FLUTE, 4.5X85MM
IMPA:630614
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630615 REAMER HAND STRAIGHT FLUTE, 5.0X90MM
IMPA:630615
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630616 REAMER HAND STRAIGHT FLUTE, 5.5X95MM
IMPA:630616
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630617 REAMER HAND STRAIGHT FLUTE, 6.0X100MM
IMPA:630617
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630618 REAMER HAND STRAIGHT FLUTE, 6.5X100MM
IMPA:630618
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630619 REAMER HAND STRAIGHT FLUTE, 7.0X105MM
IMPA:630619
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630620 REAMER HAND STRAIGHT FLUTE, 7.5X110MM
IMPA:630620
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630621 REAMER HAND STRAIGHT FLUTE, 8.0X115MM
IMPA:630621
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630622 REAMER HAND STRAIGHT FLUTE, 8.5X120MM
IMPA:630622
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630623 REAMER HAND STRAIGHT FLUTE, 9.0X125MM
IMPA:630623
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630624 REAMER HAND STRAIGHT FLUTE, 9.5X125MM
IMPA:630624
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630625 REAMER HAND STRAIGHT FLUTE, 10.0X130MM
IMPA:630625
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630626 REAMER HAND STRAIGHT FLUTE, 10.5X135MM
IMPA:630626
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630627 REAMER HAND STRAIGHT FLUTE, 11.0X140MM
IMPA:630627
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630628 REAMER HAND STRAIGHT FLUTE, 11.5X145MM
IMPA:630628
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630629 REAMER HAND STRAIGHT FLUTE, 12.0X150MM
IMPA:630629
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630630 REAMER HAND STRAIGHT FLUTE, 12.5X155MM
IMPA:630630
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630631 REAMER HAND STRAIGHT FLUTE, 13.0X160MM
IMPA:630631
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630632 REAMER HAND STRAIGHT FLUTE, 13.5X165MM
IMPA:630632
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630633 REAMER HAND STRAIGHT FLUTE, 14.0X165MM
IMPA:630633
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630634 REAMER HAND STRAIGHT FLUTE, 14.5X170MM
IMPA:630634
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630635 REAMER HAND STRAIGHT FLUTE, 15X175MM
IMPA:630635
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630636 REAMER HAND STRAIGHT FLUTE, 16X185MM
IMPA:630636
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630637 REAMER HAND STRAIGHT FLUTE, 17X190MM
IMPA:630637
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630638 REAMER HAND STRAIGHT FLUTE, 18X200MM
IMPA:630638
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630639 REAMER HAND STRAIGHT FLUTE, 19X210MM
IMPA:630639
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630640 REAMER HAND STRAIGHT FLUTE, 20X220MM
IMPA:630640
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630641 REAMER HAND STRAIGHT FLUTE, 21X230MM
IMPA:630641
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630642 REAMER HAND STRAIGHT FLUTE, 22X235MM
IMPA:630642
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630643 REAMER HAND STRAIGHT FLUTE, 23X250MM
IMPA:630643
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630644 REAMER HAND STRAIGHT FLUTE, 24X255MM
IMPA:630644
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630645 REAMER HAND STRAIGHT FLUTE, 25X260MM
IMPA:630645
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630646 REAMER HAND STRAIGHT FLUTE, 26X270MM
IMPA:630646
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630647 REAMER HAND STRAIGHT FLUTE, 28X290MM
IMPA:630647
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630648 REAMER HAND STRAIGHT FLUTE, 30X305MM
IMPA:630648
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630649 REAMER HAND STRAIGHT FLUTE, 32X315MM
IMPA:630649
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630650 REAMER HAND STRAIGHT FLUTE, 34X315MM
IMPA:630650
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630651 REAMER HAND STRAIGHT FLUTE, 36X320MM
IMPA:630651
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630652 REAMER HAND STRAIGHT FLUTE, 38X325MM
IMPA:630652
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630653 REAMER HAND STRAIGHT FLUTE, 40X330MM
IMPA:630653
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630654 REAMER HAND STRAIGHT FLUTE, 42X335MM
IMPA:630654
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630655 REAMER HAND STRAIGHT FLUTE, 44X340MM
IMPA:630655
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630656 REAMER HAND STRAIGHT FLUTE, 46X345MM
IMPA:630656
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630657 REAMER HAND STRAIGHT FLUTE, 48X350MM
IMPA:630657
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630658 REAMER HAND STRAIGHT FLUTE, 50X355MM
IMPA:630658
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630701 REAMER HAND HELICAL FLUTE, 0.5X30MM
IMPA:630701
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630702 REAMER HAND HELICAL FLUTE, 0.8X35MM
IMPA:630702
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630703 REAMER HAND HELICAL FLUTE, 1.0X40MM
IMPA:630703
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630704 REAMER HAND HELICAL FLUTE, 1.2X45MM
IMPA:630704
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630705 REAMER HAND HELICAL FLUTE, 1.5X50MM
IMPA:630705
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630706 REAMER HAND HELICAL FLUTE, 1.8X55MM
IMPA:630706
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630707 REAMER HAND HELICAL FLUTE, 2.0X60MM
IMPA:630707
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630708 REAMER HAND HELICAL FLUTE, 2.2X60MM
IMPA:630708
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630709 REAMER HAND HELICAL FLUTE, 2.5X65MM
IMPA:630709
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630710 REAMER HAND HELICAL FLUTE, 2.8X65MM
IMPA:630710
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630711 REAMER HAND HELICAL FLUTE, 3.0X72MM
IMPA:630711
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630712 REAMER HAND HELICAL FLUTE, 3.5X75MM
IMPA:630712
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630713 REAMER HAND HELICAL FLUTE, 4.0X80MM
IMPA:630713
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630714 REAMER HAND HELICAL FLUTE, 4.5X85MM
IMPA:630714
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630715 REAMER HAND HELICAL FLUTE, 5.0X90MM
IMPA:630715
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630716 REAMER HAND HELICAL FLUTE, 5.5X95MM
IMPA:630716
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630717 REAMER HAND HELICAL FLUTE, 6.0X100MM
IMPA:630717
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630718 REAMER HAND HELICAL FLUTE, 6.5X100MM
IMPA:630718
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630719 REAMER HAND HELICAL FLUTE, 7.0X105MM
IMPA:630719
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630720 REAMER HAND HELICAL FLUTE, 7.5X110MM
IMPA:630720
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630721 REAMER HAND HELICAL FLUTE, 8.0X115MM
IMPA:630721
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630722 REAMER HAND HELICAL FLUTE, 8.5X120MM
IMPA:630722
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630723 REAMER HAND HELICAL FLUTE, 9.0X125MM
IMPA:630723
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630724 REAMER HAND HELICAL FLUTE, 9.5X125MM
IMPA:630724
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630725 REAMER HAND HELICAL FLUTE, 10.0X130MM
IMPA:630725
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630726 REAMER HAND HELICAL FLUTE, 10.5X135MM
IMPA:630726
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630727 REAMER HAND HELICAL FLUTE, 11.0X140MM
IMPA:630727
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630728 REAMER HAND HELICAL FLUTE, 11.5X145MM
IMPA:630728
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630729 REAMER HAND HELICAL FLUTE, 12.0X150MM
IMPA:630729
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630730 REAMER HAND HELICAL FLUTE, 12.5X155MM
IMPA:630730
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630731 REAMER HAND HELICAL FLUTE, 13.0X160MM
IMPA:630731
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630732 REAMER HAND HELICAL FLUTE, 13.5X165MM
IMPA:630732
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630733 REAMER HAND HELICAL FLUTE, 14.0X165MM
IMPA:630733
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630734 REAMER HAND HELICAL FLUTE, 14.5X170MM
IMPA:630734
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630735 REAMER HAND HELICAL FLUTE, 15X175MM
IMPA:630735
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630736 REAMER HAND HELICAL FLUTE, 16X185MM
IMPA:630736
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630737 REAMER HAND HELICAL FLUTE, 17X190MM
IMPA:630737
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630738 REAMER HAND HELICAL FLUTE, 18X200MM
IMPA:630738
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630739 REAMER HAND HELICAL FLUTE, 19X210MM
IMPA:630739
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630740 REAMER HAND HELICAL FLUTE, 20X220MM
IMPA:630740
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630741 REAMER HAND HELICAL FLUTE, 21X230MM
IMPA:630741
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
630742 REAMER HAND HELICAL FLUTE, 22X235MM
IMPA:630742
MTML UOM:PCE
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
© 2025 ShipServ Limited