Taper Pin Reamers Hand 1/50

630801 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 0.6MM

IMPA:630801

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630802 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 0.8MM

IMPA:630802

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630803 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 1.0MM

IMPA:630803

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630804 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 1.2MM

IMPA:630804

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630805 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 1.6MM

IMPA:630805

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630806 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 2.0MM

IMPA:630806

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630807 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 2.5MM

IMPA:630807

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630808 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 3.0MM

IMPA:630808

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630809 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 4MM

IMPA:630809

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630810 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 5MM

IMPA:630810

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630811 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 6MM

IMPA:630811

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630812 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 8MM

IMPA:630812

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630813 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 10MM

IMPA:630813

MTML UOM:PCE

630814 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 13MM

IMPA:630814

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630815 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 16MM

IMPA:630815

MTML UOM:PCE

630816 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 20MM

IMPA:630816

MTML UOM:PCE

630817 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 25MM

IMPA:630817

MTML UOM:PCE

630818 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 30MM

IMPA:630818

MTML UOM:PCE

630819 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 40MM

IMPA:630819

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630820 REAMER HAND 1/50 TAPER PIN, STRAIGHT FLUTE 50MM

IMPA:630820

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630831 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 0.6MM

IMPA:630831

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630832 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 0.8MM

IMPA:630832

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630833 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 1.0MM

IMPA:630833

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630834 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 1.2MM

IMPA:630834

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630835 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 1.6MM

IMPA:630835

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630836 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 2.0MM

IMPA:630836

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630837 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 2.5MM

IMPA:630837

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630838 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 3.0MM

IMPA:630838

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630839 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 4.0MM

IMPA:630839

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630840 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 5.0MM

IMPA:630840

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630841 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 6.0MM

IMPA:630841

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630842 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 8.0MM

IMPA:630842

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630843 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 10.0MM

IMPA:630843

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630844 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 13.0MM

IMPA:630844

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630845 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 16.0MM

IMPA:630845

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630846 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 20.0MM

IMPA:630846

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630847 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 25.0MM

IMPA:630847

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630848 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 30.0MM

IMPA:630848

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630849 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 40.0MM

IMPA:630849

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.

630850 REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 50.0MM

IMPA:630850

MTML UOM:PCE

This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.