Series 2200-Cylindrical Bore

771101 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2200

IMPA:771101

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771102 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2201

IMPA:771102

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771103 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2202

IMPA:771103

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771104 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2203

IMPA:771104

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771105 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2204

IMPA:771105

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771106 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2205

IMPA:771106

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771107 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2206

IMPA:771107

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771108 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2207

IMPA:771108

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771109 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2208

IMPA:771109

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771110 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2209

IMPA:771110

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771111 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2210

IMPA:771111

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771112 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2211

IMPA:771112

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771113 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2212

IMPA:771113

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771114 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2213

IMPA:771114

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771115 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2214

IMPA:771115

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771116 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2215

IMPA:771116

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771117 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2216

IMPA:771117

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771118 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2217

IMPA:771118

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771119 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2218

IMPA:771119

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771120 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2219

IMPA:771120

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771121 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2220

IMPA:771121

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771122 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2221

IMPA:771122

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore

771123 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2222

IMPA:771123

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200–Cylindrical Bore