Series 2200K-1/12 Tapered Bore

771131 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2204K

IMPA:771131

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771132 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2205K

IMPA:771132

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771133 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2206K

IMPA:771133

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771134 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2207K

IMPA:771134

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771135 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2208K

IMPA:771135

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771136 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2209K

IMPA:771136

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771137 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2210K

IMPA:771137

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771138 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2211K

IMPA:771138

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771139 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2212K

IMPA:771139

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771140 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2213K

IMPA:771140

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771141 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2215K

IMPA:771141

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771142 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2216K

IMPA:771142

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771143 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2217K

IMPA:771143

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771144 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2218K

IMPA:771144

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771145 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2219K

IMPA:771145

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771146 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2220K

IMPA:771146

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.

771147 BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2222K

IMPA:771147

MTML UOM:PCE

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 2200K–1/12 Tapered Bore．　This type bearing must have an adapter sleeve when in use.