High Performance Non-Asbestos Sheet - Valqua No.GF-300

815601 SHEET NON-AS VALQUA HI-PERFORM, GF300 1.0X1,270X1,270MM

IMPA:815601

MTML UOM:ST

BLACKHYPER™ Valqua® No. GF300. This gasket is mainly composed of PTFE as a binder and doesn’t contain any rubber. Features: Very minor change in physical properties even under high temperatures, Excellent chemical resistance. Excellent heat resistance, Easy to handle , Does not harden easily, No hardening makes retightening possible. Temperature: -200 to 300oC/-328 to 572oF, Pressure: Max 3.5 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, liquefied gas, Applications: Pipe flanges, valve bonnets, towers & tanks, pressure vessels and heat exchangers, Color type: Black, Print color: Black. The ring molded article supports JPI (ASME / ANSI)

815602 SHEET NON-AS VALQUA HI-PERFORM, GF300 1.5X1,270X1,270MM

IMPA:815602

MTML UOM:ST

BLACKHYPER™ Valqua® No. GF300. This gasket is mainly composed of PTFE as a binder and doesn’t contain any rubber. Features: Very minor change in physical properties even under high temperatures, Excellent chemical resistance. Excellent heat resistance, Easy to handle , Does not harden easily, No hardening makes retightening possible. Temperature: -200 to 300oC/-328 to 572oF, Pressure: Max 3.5 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, liquefied gas, Applications: Pipe flanges, valve bonnets, towers & tanks, pressure vessels and heat exchangers, Color type: Black, Print color: Black. The ring molded article supports JPI (ASME / ANSI)

815603 SHEET NON-AS VALQUA HI-PERFORM, GF300 3.0X1,500X1,500MM

IMPA:815603

MTML UOM:ST

BLACKHYPER™ Valqua® No. GF300. This gasket is mainly composed of PTFE as a binder and doesn’t contain any rubber. Features: Very minor change in physical properties even under high temperatures, Excellent chemical resistance. Excellent heat resistance, Easy to handle , Does not harden easily, No hardening makes retightening possible. Temperature: -200 to 300oC/-328 to 572oF, Pressure: Max 3.5 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, liquefied gas, Applications: Pipe flanges, valve bonnets, towers & tanks, pressure vessels and heat exchangers, Color type: Black, Print color: Black. The ring molded article supports JPI (ASME / ANSI)