Dies Adjustable Round Metric Coarse
631701 DIE ROUND ADJ METRIC COARSE, M1.0XP0.25XOD16MM CARBON STEEL
IMPA:631701
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631702 DIE ROUND ADJ METRIC COARSE, M1.1XP0.25XOD16MM CARBON STEEL
IMPA:631702
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631703 DIE ROUND ADJ METRIC COARSE, M1.2XP0.25XOD16MM CARBON STEEL
IMPA:631703
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631704 DIE ROUND ADJ METRIC COARSE, M1.4XP0.30XOD16MM CARBON STEEL
IMPA:631704
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631705 DIE ROUND ADJ METRIC COARSE, M1.6XP0.35XOD16MM CARBON STEEL
IMPA:631705
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631706 DIE ROUND ADJ METRIC COARSE, M1.7XP0.35XOD16MM CARBON STEEL
IMPA:631706
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631707 DIE ROUND ADJ METRIC COARSE, M1.8XP0.35XOD16MM CARBON STEEL
IMPA:631707
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631708 DIE ROUND ADJ METRIC COARSE, M2.0XP0.40XOD16MM CARBON STEEL
IMPA:631708
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631709 DIE ROUND ADJ METRIC COARSE, M2.2XP0.45XOD16MM CARBON STEEL
IMPA:631709
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631710 DIE ROUND ADJ METRIC COARSE, M2.3XP0.40XOD16MM CARBON STEEL
IMPA:631710
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631711 DIE ROUND ADJ METRIC COARSE, M2.5XP0.45XOD16MM CARBON STEEL
IMPA:631711
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631712 DIE ROUND ADJ METRIC COARSE, M2.6XP0.45XOD16MM CARBON STEEL
IMPA:631712
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631713 DIE ROUND ADJ METRIC COARSE, M3.0XP0.50XOD20MM CARBON STEEL
IMPA:631713
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631714 DIE ROUND ADJ METRIC COARSE, M3.5XP0.60XOD20MM CARBON STEEL
IMPA:631714
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631715 DIE ROUND ADJ METRIC COARSE, M4.0XP0.70XOD20MM CARBON STEEL
IMPA:631715
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631716 DIE ROUND ADJ METRIC COARSE, M4.5XP0.75XOD20MM CARBON STEEL
IMPA:631716
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631717 DIE ROUND ADJ METRIC COARSE, M5.0XP0.80XOD20MM CARBON STEEL
IMPA:631717
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631718 DIE ROUND ADJ METRIC COARSE, M6.0XP1.00XOD20MM CARBON STEEL
IMPA:631718
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631719 DIE ROUND ADJ METRIC COARSE, M7.0XP1.00XOD25MM CARBON STEEL
IMPA:631719
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631720 DIE ROUND ADJ METRIC COARSE, M8.0XP1.25XOD25MM CARBON STEEL
IMPA:631720
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631721 DIE ROUND ADJ METRIC COARSE, M9.0XP1.25XOD25MM CARBON STEEL
IMPA:631721
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631722 DIE ROUND ADJ METRIC COARSE, M10XP1.50XOD38MM CARBON STEEL
IMPA:631722
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631723 DIE ROUND ADJ METRIC COARSE, M11XP1.50XOD38MM CARBON STEEL
IMPA:631723
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631724 DIE ROUND ADJ METRIC COARSE, M12XP1.75XOD38MM CARBON STEEL
IMPA:631724
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631725 DIE ROUND ADJ METRIC COARSE, M14XP2.00XOD38MM CARBON STEEL
IMPA:631725
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631726 DIE ROUND ADJ METRIC COARSE, M16XP2.00XOD50MM CARBON STEEL
IMPA:631726
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631727 DIE ROUND ADJ METRIC COARSE, M18XP2.50XOD50MM CARBON STEEL
IMPA:631727
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631728 DIE ROUND ADJ METRIC COARSE, M20XP2.50XOD50MM CARBON STEEL
IMPA:631728
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631729 DIE ROUND ADJ METRIC COARSE, M22XP2.50XOD50MM CARBON STEEL
IMPA:631729
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631730 DIE ROUND ADJ METRIC COARSE, M24XP3.00XOD50MM CARBON STEEL
IMPA:631730
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631731 DIE ROUND ADJ METRIC COARSE, M27XP3.00XOD63MM CARBON STEEL
IMPA:631731
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631732 DIE ROUND ADJ METRIC COARSE, M30XP3.50XOD75MM CARBON STEEL
IMPA:631732
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631733 DIE ROUND ADJ METRIC COARSE, M33XP3.50XOD75MM CARBON STEEL
IMPA:631733
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631734 DIE ROUND ADJ METRIC COARSE, M36XP4.00XOD75MM CARBON STEEL
IMPA:631734
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631735 DIE ROUND ADJ METRIC COARSE, M39XP4.00XOD75MM CARBON STEEL
IMPA:631735
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631736 DIE ROUND ADJ METRIC COARSE, M42XP4.50XOD75MM CARBON STEEL
IMPA:631736
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631801 DIE ROUND ADJ METRIC FINE, M1XP0.2XOD16MM CARBON STEEL
IMPA:631801
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631802 DIE ROUND ADJ METRIC FINE, M1.1XP0.2XOD16MM CARBON STEEL
IMPA:631802
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631803 DIE ROUND ADJ METRIC FINE, M1.2XP0.2XOD16MM CARBON STEEL
IMPA:631803
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631804 DIE ROUND ADJ METRIC FINE, M1.4XP0.2XOD16MM CARBON STEEL
IMPA:631804
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631805 DIE ROUND ADJ METRIC FINE, M1.6XP0.2XOD16MM CARBON STEEL
IMPA:631805
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631806 DIE ROUND ADJ METRIC FINE, M1.8XP0.2XOD16MM CARBON STEEL
IMPA:631806
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631807 DIE ROUND ADJ METRIC FINE, M2XP0.25XOD16MM CARBON STEEL
IMPA:631807
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631808 DIE ROUND ADJ METRIC FINE, M2.2XP0.25XOD16MM CARBON STEEL
IMPA:631808
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631809 DIE ROUND ADJ METRIC FINE, M2.5XP0.35XOD16MM CARBON STEEL
IMPA:631809
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631810 DIE ROUND ADJ METRIC FINE, M3XP0.35XOD20MM CARBON STEEL
IMPA:631810
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631811 DIE ROUND ADJ METRIC FINE, M3.5XP0.35XOD20MM CARBON STEEL
IMPA:631811
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631812 DIE ROUND ADJ METRIC FINE, M4XP0.5XOD20MM CARBON STEEL
IMPA:631812
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631813 DIE ROUND ADJ METRIC FINE, M4.5XP0.5XOD20MM CARBON STEEL
IMPA:631813
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631814 DIE ROUND ADJ METRIC FINE, M5XP0.5XOD20MM CARBON STEEL
IMPA:631814
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631815 DIE ROUND ADJ METRIC FINE, M5.5XP0.5XOD20MM CARBON STEEL
IMPA:631815
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631816 DIE ROUND ADJ METRIC FINE, M6XP0.75XOD20MM CARBON STEEL
IMPA:631816
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631817 DIE ROUND ADJ METRIC FINE, M7XP0.75XOD25MM CARBON STEEL
IMPA:631817
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631818 DIE ROUND ADJ METRIC FINE, M8XP1XOD25MM CARBON STEEL
IMPA:631818
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631819 DIE ROUND ADJ METRIC FINE, M8XP0.75XOD25MM CARBON STEEL
IMPA:631819
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631820 DIE ROUND ADJ METRIC FINE, M9XP1XOD25MM CARBON STEEL
IMPA:631820
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631821 DIE ROUND ADJ METRIC FINE, M9XP0.75XOD25MM CARBON STEEL
IMPA:631821
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631822 DIE ROUND ADJ METRIC FINE, M10XP1.25XOD38MM CARBON STEEL
IMPA:631822
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631823 DIE ROUND ADJ METRIC FINE, M10XP1XOD38MM CARBON STEEL
IMPA:631823
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631824 DIE ROUND ADJ METRIC FINE, M10XP0.75XOD38MM CARBON STEEL
IMPA:631824
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631825 DIE ROUND ADJ METRIC FINE, M11XP1XOD38MM CARBON STEEL
IMPA:631825
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631826 DIE ROUND ADJ METRIC FINE, M11XP0.75XOD38MM CARBON STEEL
IMPA:631826
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631827 DIE ROUND ADJ METRIC FINE, M12XP1.5XOD38MM CARBON STEEL
IMPA:631827
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631828 DIE ROUND ADJ METRIC FINE, M12XP1.25XOD38MM CARBON STEEL
IMPA:631828
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631829 DIE ROUND ADJ METRIC FINE, M12XP1XOD38MM CARBON STEEL
IMPA:631829
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631830 DIE ROUND ADJ METRIC FINE, M14XP1.5XOD38MM CARBON STEEL
IMPA:631830
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631831 DIE ROUND ADJ METRIC FINE, M14XP1XOD38MM CARBON STEEL
IMPA:631831
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631832 DIE ROUND ADJ METRIC FINE, M15XP1.5XOD50MM CARBON STEEL
IMPA:631832
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631833 DIE ROUND ADJ METRIC FINE, M15XP1XOD50MM CARBON STEEL
IMPA:631833
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631834 DIE ROUND ADJ METRIC FINE, M16XP1.5XOD50MM CARBON STEEL
IMPA:631834
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631835 DIE ROUND ADJ METRIC FINE, M16XP1XOD50MM CARBON STEEL
IMPA:631835
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631836 DIE ROUND ADJ METRIC FINE, M17XP1.5XOD50MM CARBON STEEL
IMPA:631836
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631837 DIE ROUND ADJ METRIC FINE, M17XP1XOD50MM CARBON STEEL
IMPA:631837
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631838 DIE ROUND ADJ METRIC FINE, M18XP2XOD50MM CARBON STEEL
IMPA:631838
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631839 DIE ROUND ADJ METRIC FINE, M18XP1.5XOD50MM CARBON STEEL
IMPA:631839
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631840 DIE ROUND ADJ METRIC FINE, M18XP1XOD50MM CARBON STEEL
IMPA:631840
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631841 DIE ROUND ADJ METRIC FINE, M20XP2XOD50MM CARBON STEEL
IMPA:631841
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631842 DIE ROUND ADJ METRIC FINE, M20XP1.5XOD50MM CARBON STEEL
IMPA:631842
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631843 DIE ROUND ADJ METRIC FINE, M20XP1XOD50MM CARBON STEEL
IMPA:631843
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631844 DIE ROUND ADJ METRIC FINE, M22XP2XOD50MM CARBON STEEL
IMPA:631844
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631845 DIE ROUND ADJ METRIC FINE, M22XP1.5XOD50MM CARBON STEEL
IMPA:631845
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631846 DIE ROUND ADJ METRIC FINE, M22XP1XOD50MM CARBON STEEL
IMPA:631846
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631847 DIE ROUND ADJ METRIC FINE, M24XP2XOD50MM CARBON STEEL
IMPA:631847
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631848 DIE ROUND ADJ METRIC FINE, M24XP1.5XOD50MM CARBON STEEL
IMPA:631848
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631849 DIE ROUND ADJ METRIC FINE, M24XP1XOD50MM CARBON STEEL
IMPA:631849
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631850 DIE ROUND ADJ METRIC FINE, M25XP2XOD50MM CARBON STEEL
IMPA:631850
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631851 DIE ROUND ADJ METRIC FINE, M25XP1.5XOD50MM CARBON STEEL
IMPA:631851
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631852 DIE ROUND ADJ METRIC FINE, M25XP1XOD50MM CARBON STEEL
IMPA:631852
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631853 DIE ROUND ADJ METRIC FINE, M26XP1.5XOD63MM CARBON STEEL
IMPA:631853
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631854 DIE ROUND ADJ METRIC FINE, M27XP2XOD63MM CARBON STEEL
IMPA:631854
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631855 DIE ROUND ADJ METRIC FINE, M27XP1.5XOD63MM CARBON STEEL
IMPA:631855
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631856 DIE ROUND ADJ METRIC FINE, M27XP1XOD63MM CARBON STEEL
IMPA:631856
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631857 DIE ROUND ADJ METRIC FINE, M28XP2XOD63MM CARBON STEEL
IMPA:631857
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631858 DIE ROUND ADJ METRIC FINE, M28XP1.5XOD63MM CARBON STEEL
IMPA:631858
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631859 DIE ROUND ADJ METRIC FINE, M28XP1XOD63MM CARBON STEEL
IMPA:631859
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631860 DIE ROUND ADJ METRIC FINE, M30XP3XOD75MM CARBON STEEL
IMPA:631860
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631861 DIE ROUND ADJ METRIC FINE, M30XP2XOD75MM CARBON STEEL
IMPA:631861
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631862 DIE ROUND ADJ METRIC FINE, M30XP1.5XOD75MM CARBON STEEL
IMPA:631862
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631863 DIE ROUND ADJ METRIC FINE, M30XP1XOD75MM CARBON STEEL
IMPA:631863
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
631864 DIE ROUND ADJ METRIC FINE, M32XP2XOD75MM CARBON STEEL
IMPA:631864
MTML UOM:PCE
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
© 2025 ShipServ Limited