Hand Taps Metric Coarse Thread

631001 TAP HAND METRIC COARSE, M1.0XP0.25MM 3'S CARBON STEEL

IMPA:631001

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631002 TAP HAND METRIC COARSE, M1.1XP0.25MM 3'S CARBON STEEL

IMPA:631002

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631003 TAP HAND METRIC COARSE, M1.2XP0.25MM 3'S CARBON STEEL

IMPA:631003

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631004 TAP HAND METRIC COARSE, M1.4XP0.30MM 3'S CARBON STEEL

IMPA:631004

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631005 TAP HAND METRIC COARSE, M1.6XP0.35MM 3'S CARBON STEEL

IMPA:631005

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631006 TAP HAND METRIC COARSE, M1.7XP0.35MM 3'S CARBON STEEL

IMPA:631006

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631007 TAP HAND METRIC COARSE, M1.8XP0.35MM 3'S CARBON STEEL

IMPA:631007

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631008 TAP HAND METRIC COARSE, M2.0XP0.40MM 3'S CARBON STEEL

IMPA:631008

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631009 TAP HAND METRIC COARSE, M2.2XP0.45MM 3'S CARBON STEEL

IMPA:631009

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631010 TAP HAND METRIC COARSE, M2.3XP0.40MM 3'S CARBON STEEL

IMPA:631010

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631011 TAP HAND METRIC COARSE, M2.5XP0.45MM 3'S CARBON STEEL

IMPA:631011

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631012 TAP HAND METRIC COARSE, M2.6XP0.45MM 3'S CARBON STEEL

IMPA:631012

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631013 TAP HAND METRIC COARSE, M3.0XP0.50MM 3'S CARBON STEEL

IMPA:631013

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631014 TAP HAND METRIC COARSE, M3.5XP0.60MM 3'S CARBON STEEL

IMPA:631014

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631015 TAP HAND METRIC COARSE, M4.0XP0.70MM 3'S CARBON STEEL

IMPA:631015

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631016 TAP HAND METRIC COARSE, M4.5XP0.75MM 3'S CARBON STEEL

IMPA:631016

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631017 TAP HAND METRIC COARSE, M5.0XP0.80MM 3'S CARBON STEEL

IMPA:631017

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631018 TAP HAND METRIC COARSE, M6.0XP1.00MM 3'S CARBON STEEL

IMPA:631018

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631019 TAP HAND METRIC COARSE, M7.0XP1.00MM 3'S CARBON STEEL

IMPA:631019

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631020 TAP HAND METRIC COARSE, M8.0XP1.25MM 3'S CARBON STEEL

IMPA:631020

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631021 TAP HAND METRIC COARSE, M9.0XP1.25MM 3'S CARBON STEEL

IMPA:631021

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631022 TAP HAND METRIC COARSE, M10XP1.50MM 3'S CARBON STEEL

IMPA:631022

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631023 TAP HAND METRIC COARSE, M11XP1.50MM 3'S CARBON STEEL

IMPA:631023

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631024 TAP HAND METRIC COARSE, M12XP1.75MM 3'S CARBON STEEL

IMPA:631024

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631025 TAP HAND METRIC COARSE, M14XP2.00MM 3'S CARBON STEEL

IMPA:631025

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631026 TAP HAND METRIC COARSE, M16XP2.00MM 3'S CARBON STEEL

IMPA:631026

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631027 TAP HAND METRIC COARSE, M18XP2.50MM 3'S CARBON STEEL

IMPA:631027

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631028 TAP HAND METRIC COARSE, M20XP2.50MM 3'S CARBON STEEL

IMPA:631028

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631029 TAP HAND METRIC COARSE, M22XP2.50MM 3'S CARBON STEEL

IMPA:631029

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631030 TAP HAND METRIC COARSE, M24XP3.00MM 3'S CARBON STEEL

IMPA:631030

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631031 TAP HAND METRIC COARSE, M27XP3.00MM 3'S CARBON STEEL

IMPA:631031

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631032 TAP HAND METRIC COARSE, M30XP3.50MM 3'S CARBON STEEL

IMPA:631032

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631033 TAP HAND METRIC COARSE, M33XP3.50MM 3'S CARBON STEEL

IMPA:631033

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631034 TAP HAND METRIC COARSE, M36XP4.00MM 3'S CARBON STEEL

IMPA:631034

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631035 TAP HAND METRIC COARSE, M39XP4.00MM 3'S CARBON STEEL

IMPA:631035

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631036 TAP HAND METRIC COARSE, M42XP4.50MM 3'S CARBON STEEL

IMPA:631036

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631037 TAP HAND METRIC COARSE, M45XP4.50MM 3'S CARBON STEEL

IMPA:631037

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631038 TAP HAND METRIC COARSE, M48XP5.00MM 3'S CARBON STEEL

IMPA:631038

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631051 TAP HAND METRIC COARSE M1.0, P0.25MM 3'S HIGH SPEED STEEL

IMPA:631051

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631052 TAP HAND METRIC COARSE M1.1, P0.25MM 3'S HIGH SPEED STEEL

IMPA:631052

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631053 TAP HAND METRIC COARSE M1.2, P0.25MM 3'S HIGH SPEED STEEL

IMPA:631053

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631054 TAP HAND METRIC COARSE M1.4, P0.30MM 3'S HIGH SPEED STEEL

IMPA:631054

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631055 TAP HAND METRIC COARSE M1.6, P0.35MM 3'S HIGH SPEED STEEL

IMPA:631055

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631056 TAP HAND METRIC COARSE M1.7, P0.35MM 3'S HIGH SPEED STEEL

IMPA:631056

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631057 TAP HAND METRIC COARSE M1.8, P0.35MM 3'S HIGH SPEED STEEL

IMPA:631057

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631058 TAP HAND METRIC COARSE M2.0, P0.40MM 3'S HIGH SPEED STEEL

IMPA:631058

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631059 TAP HAND METRIC COARSE M2.2, P0.45MM 3'S HIGH SPEED STEEL

IMPA:631059

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631060 TAP HAND METRIC COARSE M2.3, P0.40MM 3'S HIGH SPEED STEEL

IMPA:631060

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631061 TAP HAND METRIC COARSE M2.5, P0.45MM 3'S HIGH SPEED STEEL

IMPA:631061

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631062 TAP HAND METRIC COARSE M2.6, P0.45MM 3'S HIGH SPEED STEEL

IMPA:631062

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631063 TAP HAND METRIC COARSE M3.0, P0.50MM 3'S HIGH SPEED STEEL

IMPA:631063

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631064 TAP HAND METRIC COARSE M3.5, P0.60MM 3'S HIGH SPEED STEEL

IMPA:631064

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631065 TAP HAND METRIC COARSE M4.0, P0.70MM 3'S HIGH SPEED STEEL

IMPA:631065

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631066 TAP HAND METRIC COARSE M4.5, P0.75MM 3'S HIGH SPEED STEEL

IMPA:631066

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631067 TAP HAND METRIC COARSE M5.0, P0.80MM 3'S HIGH SPEED STEEL

IMPA:631067

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631068 TAP HAND METRIC COARSE M6.0, P1.00MM 3'S HIGH SPEED STEEL

IMPA:631068

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631069 TAP HAND METRIC COARSE M7.0, P1.00MM 3'S HIGH SPEED STEEL

IMPA:631069

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631070 TAP HAND METRIC COARSE M8.0, P1.25MM 3'S HIGH SPEED STEEL

IMPA:631070

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631071 TAP HAND METRIC COARSE M9.0, P1.25MM 3'S HIGH SPEED STEEL

IMPA:631071

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631072 TAP HAND METRIC COARSE M10, P1.50MM 3'S HIGH SPEED STEEL

IMPA:631072

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631073 TAP HAND METRIC COARSE M11, P1.50MM 3'S HIGH SPEED STEEL

IMPA:631073

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631074 TAP HAND METRIC COARSE M12, P1.75MM 3'S HIGH SPEED STEEL

IMPA:631074

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631075 TAP HAND METRIC COARSE M14, P2.00MM 3'S HIGH SPEED STEEL

IMPA:631075

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631076 TAP HAND METRIC COARSE M16, P2.00MM 3'S HIGH SPEED STEEL

IMPA:631076

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631077 TAP HAND METRIC COARSE M18, P2.50MM 3'S HIGH SPEED STEEL

IMPA:631077

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631078 TAP HAND METRIC COARSE M20, P2.50MM 3'S HIGH SPEED STEEL

IMPA:631078

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631079 TAP HAND METRIC COARSE M22, P2.50MM 3'S HIGH SPEED STEEL

IMPA:631079

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631080 TAP HAND METRIC COARSE M24, P3.00MM 3'S HIGH SPEED STEEL

IMPA:631080

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631081 TAP HAND METRIC COARSE M27, P3.00MM 3'S HIGH SPEED STEEL

IMPA:631081

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631082 TAP HAND METRIC COARSE M30, P3.50MM 3'S HIGH SPEED STEEL

IMPA:631082

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631083 TAP HAND METRIC COARSE M33, P3.50MM 3'S HIGH SPEED STEEL

IMPA:631083

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631084 TAP HAND METRIC COARSE M36, P4.00MM 3'S HIGH SPEED STEEL

IMPA:631084

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631085 TAP HAND METRIC COARSE M39, P4.00MM 3'S HIGH SPEED STEEL

IMPA:631085

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631086 TAP HAND METRIC COARSE M42, P4.50MM 3'S HIGH SPEED STEEL

IMPA:631086

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631087 TAP HAND METRIC COARSE M45, P4.50MM 3'S HIGH SPEED STEEL

IMPA:631087

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

631088 TAP HAND METRIC COARSE M48, P5.00MM 3'S HIGH SPEED STEEL

IMPA:631088

MTML UOM:SET

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand. Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper tap, plug tap and bottoming tap. Two kinds of materials of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.