Dies Hexagon Rethreading

632101 DIE RETHREADING HEXAGON METRIC, COARSE M3.0XP0.50MM C. STEEL

IMPA:632101

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632102 DIE RETHREADING HEXAGON METRIC, COARSE M3.0XP0.60MM C. STEEL

IMPA:632102

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632103 DIE RETHREADING HEXAGON METRIC, COARSE M3.5XP0.60MM C. STEEL

IMPA:632103

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632104 DIE RETHREADING HEXAGON METRIC, COARSE M4.0XP0.70MM C. STEEL

IMPA:632104

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632105 DIE RETHREADING HEXAGON METRIC, COARSE M4.0XP0.75MM C. STEEL

IMPA:632105

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632106 DIE RETHREADING HEXAGON METRIC, COARSE M4.5XP0.75MM C. STEEL

IMPA:632106

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632107 DIE RETHREADING HEXAGON METRIC, COARSE M5.0XP0.80MM C. STEEL

IMPA:632107

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632108 DIE RETHREADING HEXAGON METRIC, COARSE M5.0XP0.90MM C. STEEL

IMPA:632108

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632109 DIE RETHREADING HEXAGON METRIC, COARSE M5.5XP0.90MM C. STEEL

IMPA:632109

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632110 DIE RETHREADING HEXAGON METRIC, COARSE M6.0XP1.00MM C. STEEL

IMPA:632110

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632111 DIE RETHREADING HEXAGON METRIC, COARSE M7.0XP1.00MM C. STEEL

IMPA:632111

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632112 DIE RETHREADING HEXAGON METRIC, COARSE M8.0XP1.25MM C. STEEL

IMPA:632112

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632113 DIE RETHREADING HEXAGON METRIC, COARSE M9.0XP1.25MM C. STEEL

IMPA:632113

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632114 DIE RETHREADING HEXAGON METRIC, COARSE M10XP1.50MM C. STEEL

IMPA:632114

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632115 DIE RETHREADING HEXAGON METRIC, COARSE M11XP1.50MM C. STEEL

IMPA:632115

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632116 DIE RETHREADING HEXAGON METRIC, COARSE M12XP1.75MM C. STEEL

IMPA:632116

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632117 DIE RETHREADING HEXAGON METRIC, COARSE M14XP2.00MM C. STEEL

IMPA:632117

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632118 DIE RETHREADING HEXAGON METRIC, COARSE M16XP2.00MM C. STEEL

IMPA:632118

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632119 DIE RETHREADING HEXAGON METRIC, COARSE M18XP2.50MM C. STEEL

IMPA:632119

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632120 DIE RETHREADING HEXAGON METRIC, COARSE M20XP2.50MM C. STEEL

IMPA:632120

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632121 DIE RETHREADING HEXAGON METRIC, COARSE M22XP2.50MM C. STEEL

IMPA:632121

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632122 DIE RETHREADING HEXAGON METRIC, COARSE M24XP3.00MM C. STEEL

IMPA:632122

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632123 DIE RETHREADING HEXAGON METRIC, COARSE M27XP3.00MM C. STEEL

IMPA:632123

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632124 DIE RETHREADING HEXAGON METRIC, COARSE M30XP3.50MM C. STEEL

IMPA:632124

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632131 DIE RETHREADING HEX WHITWORTH, COARSE W1/8X40TPI CARBON STEEL

IMPA:632131

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632132 DIE RETHREADING HEX WHITWORTH, COARSE W3/16X24TPI C. STEEL

IMPA:632132

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632133 DIE RETHREADING HEX WHITWORTH, COARSE W1/4X20TPI CARBON STEEL

IMPA:632133

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632134 DIE RETHREADING HEX WHITWORTH, COARSE W5/16X18TPI C. STEEL

IMPA:632134

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632135 DIE RETHREADING HEX WHITWORTH, COARSE W3/8X16TPI CARBON STEEL

IMPA:632135

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632136 DIE RETHREADING HEX WHITWORTH, COARSE W7/16X14TPI C. STEEL

IMPA:632136

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632137 DIE RETHREADING HEX WHITWORTH, COARSE W1/2X12TPI CARBON STEEL

IMPA:632137

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632138 DIE RETHREADING HEX WHITWORTH, COARSE W9/16X12TPI C. STEEL

IMPA:632138

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632139 DIE RETHREADING HEX WHITWORTH, COARSE W5/8X11TPI CARBON STEEL

IMPA:632139

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632140 DIE RETHREADING HEX WHITWORTH, COARSE W3/4X10TPI CARBON STEEL

IMPA:632140

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632141 DIE RETHREADING HEX WHITWORTH, COARSE W7/8X9TPI CARBON STEEL

IMPA:632141

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632142 DIE RETHREADING HEX WHITWORTH, COARSE W1X8TPI CARBON STEEL

IMPA:632142

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632143 DIE RETHREADING HEX WHITWORTH, COARSE W1-1/8X7TPI C. STEEL

IMPA:632143

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632144 DIE RETHREADING HEX WHITWORTH, COARSE W1-1/4X7TPI C. STEEL

IMPA:632144

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632145 DIE RETHREADING HEX WHITWORTH, COARSE W1-3/8X6TPI C. STEEL

IMPA:632145

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632146 DIE RETHREADING HEX WHITWORTH, COARSE W1-1/2X6TPI C. STEEL

IMPA:632146

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632147 DIE RETHREADING HEX WHITWORTH, COARSE W1-5/8X5TPI C. STEEL

IMPA:632147

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632148 DIE RETHREADING HEX WHITWORTH, COARSE W1-3/4X5TPI C. STEEL

IMPA:632148

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632149 DIE RETHREADING HEX WHITWORTH, COARSE W1-7/8X4.5TPI C. STEEL

IMPA:632149

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632150 DIE RETHREADING HEX WHITWORTH, COARSE W2X4.5TPI CARBON STEEL

IMPA:632150

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632161 DIE RETHREADING HEX STRAIGHT, THREAD PF1/8X28TPI C. STEEL

IMPA:632161

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632162 DIE RETHREADING HEX STRAIGHT, THREAD PF1/4X19TPI C. STEEL

IMPA:632162

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632163 DIE RETHREADING HEX STRAIGHT, THREAD PF3/8X19TPI C. STEEL

IMPA:632163

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632164 DIE RETHREADING HEX STRAIGHT, THREAD PF1/2X14TPI C. STEEL

IMPA:632164

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632165 DIE RETHREADING HEX STRAIGHT, THREAD PF3/4X14TPI C. STEEL

IMPA:632165

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632166 DIE RETHREADING HEX STRAIGHT, THREAD PF1X11TPI CARBON STEEL

IMPA:632166

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632167 DIE RETHREADING HEX STRAIGHT, THREAD PF1-1/4X11TPI C. STEEL

IMPA:632167

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632168 DIE RETHREADING HEX STRAIGHT, THREAD PF1-3/8X11TPI C. STEEL

IMPA:632168

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632169 DIE RETHREADING HEX STRAIGHT, THREAD PF1-1/2X11TPI C. STEEL

IMPA:632169

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632170 DIE RETHREADING HEX STRAIGHT, THREAD PF1-3/4X11TPI C. STEEL

IMPA:632170

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632171 DIE RETHREADING HEX STRAIGHT, THREAD PF2X11TPI CARBON STEEL

IMPA:632171

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632176 DIE RETHREADING HEX TAPER PIPE, THREAD PT1/8X28TPI C. STEEL

IMPA:632176

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632177 DIE RETHREADING HEX TAPER PIPE, THREAD PT1/4X19TPI C. STEEL

IMPA:632177

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632178 DIE RETHREADING HEX TAPER PIPE, THREAD PT3/8X19TPI C. STEEL

IMPA:632178

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632179 DIE RETHREADING HEX TAPER PIPE, THREAD PT1/2X14TPI C. STEEL

IMPA:632179

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632180 DIE RETHREADING HEX TAPER PIPE, THREAD PT3/4X14TPI C. STEEL

IMPA:632180

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632181 DIE RETHREADING HEX TAPER PIPE, THREAD PT1X11TPI CARBON STEEL

IMPA:632181

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632182 DIE RETHREADING HEX TAPER PIPE, THREAD PT1-1/4X11TPI C. STEEL

IMPA:632182

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632183 DIE RETHREADING HEX TAPER PIPE, THREAD PT1-3/8X11TPI C. STEEL

IMPA:632183

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632184 DIE RETHREADING HEX TAPER PIPE, THREAD PT1-1/2X11TPI C. STEEL

IMPA:632184

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632185 DIE RETHREADING HEX TAPER PIPE, THREAD PT1-3/4X11TPI C. STEEL

IMPA:632185

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

632186 DIE RETHREADING HEX TAPER PIPE, THREAD PT2X11TPI CARBON STEEL

IMPA:632186

MTML UOM:PCE

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.